PA6 GY601 SABIC (formerly GE)

 Our stock of PA6 products have PA6 GY601 spot SABIC (formerly GE) Purpose: Other Characteristics Notes: good UV resistance, thermal stability, important parameters: density: 1.14 g / cm3 mold shrinkage: 1.3% notched impact strength: 48 Tensile strength: 79.3 MPa flexural modulus: 2460 MPa thermal deformation temperature: 65.6 ℃ Manufacturer: SABIC Innovative Plastics (formerly GE) PA6 50G3 Shenzhen Xing Asia Purpose: Other Features Note: glass fabric reinforced materials, 15% flow highly important parameters: the density: 1.25 g / cm3 Water absorption: 1.7% notched impact strength: 18 flexural strength: 170 MPa flexural modulus: 7100 MPa thermal deformation temperature: 220 ℃ Manufacturer: Shenzhen Asia-Pacific Ltd. PA6 K225 -KWS Dutch DSM uses: Other Features Note: Features: thermal stability, halogen-free flame retardant, mold. Important parameters: density: 1.18 g / cm3 Water Absorption: 2.5% mold shrinkage rate: 1% notched impact strength: 5 Tensile strength: 40 MPa Elongation: 50% of the heat distortion temperature: 80 ℃ Manufacturer: Dutch company DSM PA6 6G30V0EF Phil Walker uses: other important parameters: density: 1.4 g / cm3 Water Absorption: 5% mold shrinkage rate: 0.2% Elongation: 2.5% Hardness: 120 Vicat softening point: 210 ℃ heat distortion temperature: 205 ℃ Manufacturer: Italy Walker Phil Lehman German engineering company PA6 3-7088-2 Fox Use: Automotive Parts Features Note: Conductive low warpage rigidity, good thermal stability, good strength Important parameters: density: 1.28 g / cm3 Water absorption: 1% mold shrinkage: 0.2% notched impact strength: 35 flexural strength: 195 MPa flexural modulus: 10000 MPa Vicat softening point: 220 ℃ heat distortion temperature: 200 ℃ Manufacturer: Germany Lehman Fox PA6 AG 800 Indian companies Tipco Uses: Other Features Note: Glass fiber reinforced materials, 40% by weight of filler, high heat resistance Important parameters: melt flow rate: 5 g / 10min density: 1.47 g / cm3 Water absorption: 0.3% molding shrinkage rate: 1% Tensile strength: 180 MPa Elongation: 4% bending strength: 225 MPa flexural modulus: 9400 MPa Vicat softening point: 218 ℃ heat distortion temperature: 220 ℃ Manufacturer: Tipco companies in India Report of a variety of materials factory proved COA MSDS UR yellow card SGS, etc. For more detailed information, please send an email or call 13825743960 landline 13825743960@163.COM Advisory: 0769-82932991 82932992 ext 8013 to obtain information; Contact: Mr. Wang