Mixer equipment manufacturers | Mixer equipment | Qingdao Heng

 S11 series of rolling wheel Mixer is mainly used foundry sand and a single noodle mixture of sand, can also be used for large-scale foundry core sand mixed system and since the hard sand. Features: Sand high efficiency, good quality and wide range. Diabase, tungsten carbide surfacing, 2 fillers and other new materials, greatly improving the life of wearing parts. Using two national patents, technical parameters meet JB / T2656-91 Mixer equipment manufacturers, advanced technology, reasonable structure. Hydraulic coupling, steel gears, lubrication control machine, to ensure a smooth and reliable transmission system, and can load start. Rotary discharge door (national patent 98240318.6) open and flexible, and reliable. Steel base greatly facilitate the use and installation of the main features of rotor-type mixer and rolling wheel Mixer compared rotor mixer has the following characteristics: a rotor-type mixer because there is no rolling wheels and scraping board and turn the best word buried in the sand, so sand mixer chassis height can be increased, thus feeding time more than the rolling wheel Mixer. 2, the rotor mixer Mixer equipment simple structure, light weight, easy to install, on the basis of the requirements of lower than rolling wheel sand confidential. 3, rolling wheel Mixer often result when the sand-type shift "press cake" phenomenon, rotor mixer, mixed sand loose sand caking device model, high permeability, wet compressive strength Hao generally do not directly through loose sand for modeling. 4, the vulnerability of rotor mixer easy disassembly, repair large space inside, so are very easy to clean maintenance. 5, the rotor mixer smooth, low noise, can start a load procedures before entering the workshop must wear safety shoes good, helmets, masks, gloves and other protective equipment, otherwise not allowed into the workshop. 2, Mixer operator must be familiar with the structure and performance of the equipment. 3, the new sand mixer for subject screening, drying; subject to sand after sand regeneration process, can be used. 4, when added to the resin and hardener, must wear gloves, glasses, careful not to splash him. Requires accurate proportioning. 5, before starting Mixer, check both sides of the rails, whether there are obstacles, driving, pay attention to passers-by. 6, when the work should be the person responsible for the operation may not post other people to avoid illegal operation. 7, when a sand mill maintenance, in addition to sand off the power device characteristics, but also set up special care. 8, in the clean sand troughs to stop cleaning, the spiral blade clean up in preparation for the next sand. 9, the timely removal of sand scattered on the work site and objects, keeping the workplace clean and walkways clear, in order to facilitate safe. Mixer equipment manufacturers | Mixer equipment | Qingdao Heng Heng Machinery Co., Ltd. is provided by Qingdao. Qingdao Heng Machinery Co., Ltd. (www.thjidian.com) strong, credible, Shandong Qingdao Cleaning equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Qingdao Heng and you hand into the brilliant, for a better future!