Spirax Sarco TD16 thermodynamic traps

Spirax Sarco agent in Shilong Valve Valve Co., Ltd. [Spirax Sarco TD16 thermodynamic steam trap] is the main channel, with hot steam, plus casing, coil heated storage tanks, tank, and Ideal penthouse flat iron machine versatile. TD type of trap as installed outdoors, and when the weather conditions are cold, we recommend that the valve on the bonnet insulation or a heat shield configuration, [Spirax Sarco TD16 thermodynamic traps] to reduce heat loss and climate action impact of the cycle frequency can reduce wear and prolong life. For air lock phenomenon may occur, with optional thermal power disc anti-lock gas trap, or other install a separate vent. [Spirax Sarco TD16 thermodynamic traps] complete specifications, to meet the needs of different users, the main products are: Spirax Sarco TD16 trap, trap TD16F Spirax Sarco Spirax Sarco TD25 trap, TD32F Spirax Sarco steam traps, Spirax Sarco TD42L / H traps, Spirax Sarco TD45 traps, Spirax Sarco steam traps, etc. TD120. [Spirax Sarco TD16 thermodynamic traps] combines a secure, reliable, simple structure and high efficiency. 1, with a simple and reliable thermodynamic traps and efficient. 2, only one moving part - hardened stainless steel disc - emission mode for spraying row, close tightly. 3, can withstand heat, water hammer, corrosion, freezing and vibration applications. 4, thermodynamic steam traps trap is the preferred pipeline. [Spirax Sarco TD16 thermodynamic traps] within one active valves, both sensitive parts is action performed pieces. Depending on the thermodynamic principles flow rate and volume of steam and condensate through the change, so that the differential pressure valve have different up and down, driven valve switch valves. Leakage rate of 3%, the degree of supercooling of 8 ℃ -15 ℃. When the device starts cooling off condensate piping, condensate valve opened by the working pressure, rapid discharge. When the condensate discharge is completed, the steam is then discharged, because larger than the condensation of water vapor volume and flow rate, so that the differential pressure valve to generate up and down, quickly close the valve in the steam flow rate of suction. When the valve is closed, both sides of the valve under pressure, the valve below the force area is less than the above force area, due to the pressure inside the trap steam from the steam chamber pressure, so the valve on top of the force is greater than the following, the valve tightly closed. When the steam chamber inside the steam trap cooled to condense water vapor pressure inside the room disappears. Condensate pushed by work pressure valves, condensate continued discharge cycle work, intermittent drainage.