K11 waterproof coating, waterproof coatings, waterproofing materials Kim

 Construction of the first pass coating polyurethane waterproof coating polyurethane coating materials A, B and xylene feed preparation rata product descriptions bridge waterproof coating, stir with a rubber scraper or scraping paint brush (brush) at the grassroots level surface , Scraping thickness should be uniform, scraping amount 0.8-1.kg/m2 appropriate. Polyurethane waterproof coating film a second time after the first pass construction cure the coating, then the above formula and method scraping paint the second time. Scraping the direction of the plane should be perpendicular to the direction of the first pass brushing, scraping amount remains the same as the first pass. Polyurethane waterproof coating film and stick a third time after the second pass of construction sand cure the coating, then the above formula and the third time the coating method scraping, scraping amount 0.4-0.5kg / m2 is appropriate. In the third time is not yet cured coating when construction is completed, should be diluted to a small amount of clean sand sprinkled on the surface, in order to increase the bonding capacity he will be covered between the cement mortar. When fully cured coating and inspection acceptance, you can wipe the protective layer of cement mortar or paste tile, mosaics and other decorative layer. Bitumen coating varieties: a waterproof coating emulsified asphalt waterproof coating, mainly used for waterproofing of buildings; two colored emulsified asphalt coating for roof waterproofing; three cationic emulsified asphalt waterproof coatings, mainly for the cement board... waterproof gypsum board and fiberboard; four non-ionic emulsion bitumen coating, mainly used for roofing, underground moisture, pipeline corrosion, canal seepage, underground water, etc;.. five asphalt base of thick waterproof coating waterborne polyurethane waterproof coating, Mainly used for roof waterproofing; Six ointment diluted bitumen waterproofing coating for roof waterproofing; Seven fatty emulsified asphalt for roofing waterproofing; Eight damp asphalt coating K11 waterproof coating for roof waterproofing; nine The thick bitumen waterproofing coatings, potting materials do ten bentonite emulsified asphalt waterproof coatings for roofing, repair leaks layers room, underground engineering, ground moisture and seed banks;. 11. lime coating of bitumen, the main for the construction of roofing and waterproofing pavement; K11 waterproof coating, waterproof coatings, waterproofing materials provided by Kim Kim Waterproof Material Co., Ltd. Shouguang City. Shouguang City, Kim waterproof material Ltd. (www.jinzhengfangshui.com) strong, credible, Shandong Weifang waterproof, moisture-proof material industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Kim waterproof material and you hand into the brilliant, for a better future!