Teng Wei Color (Figure), color pressure plate, pressure plate Qingpu District

 Perform standard editing GB / T12754-2006 "color coated steel sheet and strip" GB / T12755-2008 "building with a pressure plate" GB / 50018-2002 "cold-formed steel technical specifications" 5 performance requirements edit galvanized environment and anti-corrosion steel galvanized steel ordinary galvanized steel (g / m2 / year) galvanized steel (g / m2 / year) severe corrosive marine environment 14016 Industrial / marine corrosion environment Country 204.2 41.3 Note: Table The data is relatively common galvanized steel Z275 (two-sided galvanized 275g / m) and galvanized steel AZ150 (double-sided metal coating weight 150g / m) between. Installation Shanghai Tang Wei Color Co. pressure plate in addition to ensuring safe and reliable external color pressure plate, waterproof and sealing issues concerning the use of the function and longevity of buildings 720 pressure plate, should note the following: Roofing self-tapping screw, rivet general requirements provided in the wave bee, siding general requirements provided in the trough, self-tapping screws with rubber seal lid pad must be complete, and the exposed parts of the waterproof gasket and rust can screw cap. Exposed rivet must be waterproof, coated with sealant exposed nail heads. Should overlap the back roof panels, fascia boards, corners board and pan of water boards and other accessories between the dominant wind direction, the lap portion of the contact surface sealant should be used bearing pressure plate, as much as possible to avoid connecting rivet roof trough. Sandwich, or docking sites lap insulation board should be set up between the seal, the seal should pass long, usually with soft polyurethane foam sealing strip. At both ends of the pressure plate, and the plate should be set to the same end-sealing foam plugs were generally soft polyurethane foam products, with a sticker pasted. Installation, construction waste should be cleaned, cut scrap should be collected into a centralized under the pile on the ground. Should reduce the pressure steel plate personnel move, is strictly prohibited in the pressure piled heavy steel plate. Teng Wei Color (Figure), color pressure plate, pressure plate, Qingpu District, Shanghai Tang Wei by Color Products Limited. Color Products Co., Ltd. Shanghai Tang Wei (www.tengweicaigang.com/)(www.tengweicaigang.com) located at 2368 Road, Baoshan District, Romania. Scraps and development in the wave of market economy, the current Teng Wei Color has a high profile in the steel, and enjoys a good reputation. Teng Wei Cai Gang made the whole network business alliance certification, marking our service and management level has reached a new height. Teng Wei Color staff willing to work with all people of insight and common development, for a better future.