Humidity, salt spray corrosion test

Salt spray corrosion test detailed humid salt spray corrosion test Description: This series of products for artificial oceanic salt spray corrosion test equipment, the electrical equipment, metal materials, surface treatment products, a variety of materials, including paint , electroplating, inorganic and organic coating, anodizing, corrosion rust oil processing, accelerated corrosion test changes. Also (humidity, salt spray, mold), one of "three" artificial climate environment test equipment, is the study of the mechanical, defense industry, light industry, electronics, instrumentation and other industries to adapt to a variety of environmental and reliability of an important test equipment, also do vinegar salt spray test. The main technical parameters meet the national standard GB2423.17 "Electrical and Electronic Products Environmental Test Test Ka: Salt Spray Test Method" and IEC68-2-11 "Basic environmental testing procedures Part II: Test, test Ka: fog" and ISO9227 " artificial climate corrosion test - salt spray test "and other standards related to salt spray test. The chamber in line with the national standard GB10587 "salt spray chamber technology" design and production execution. Structural characteristics of the inner and outer shell are imported PVC rigid plastic plate made of corrosion-resistant, anti-aging, smooth surface gorgeous. Chamber with water sealed, transparent cover made of imported PVC rigid plastic board, ready to look at the sample position and spray state. No crystal glass nozzle configuration (quartz glass production), remove the blockage of worry-free salt. 4. Spray system uses a spray tower, distribution, fog particles small, natural subsidence and adjustable gap, continuous spray time adjustable. The control system uses high-precision PID temperature controller, error ± 0.1 ℃. Domestic table (standard), optional Fujitsu, physical and chemical RKC. Dual pressure adjustment, the unique pressure struts, panel switch cover operating ease, with water shortages, over-temperature, phase multiple security devices that it works via compressed air nozzle on the way leading to the bubble column was wet, nozzle The etching solution and air atomized into corrosive mist tank heater to keep the temperature inside. The main technical parameters of the device type (YWX) 010 025 075 100 200 Chamber size (cm) 50 × 50 × 40 55 × 90 × 60 75 × 110 × 60 100 × 130 × 60 100 × 200 × 80 technical parameters temperature range RT + 10 ~ 55 ℃ temperature uniformity ≤ ± 2 ℃ temperature fluctuation ≤ ± 0.5 ℃ fog sedimentation rate 1 ~ 2ml / 80cm2h saturated air pressure 0.8 ~ 2 ± 0.01kg / cm2 test chamber temperature saline test method: 35 ± 1 ℃ / corrosion test method: 50 ± 1 ℃ air barrel temperature saline test method: 47 ± 1 ℃ / corrosion test method: 63 ± 1 ℃ test chamber volume 100L 250L 500L 1000L 2000L bucket fill volume 15L 25L 40L 40L 40L Power 220V · 50HZ / (380V · 50HZ three-phase four-wire)