Supply Henan Zhumadian 8 m high quality manufacturer of solar street lights, parameters, quotes

The output of the battery pack apparatus 1. solar panel is connected to the positive and negative measures shall be adopted before the controller prevents the shorted; 2. the stent is connected with the solar cell module to strong solid; output line 3. The assembly should prevent bare, and dried Ties pitched; 4. battery pack should face toward the south, with a compass pointing to prevail. Ground floor lamp casting 1. determine the orientation; survey geological conditions, if the surface 1 m 2 are both soft soil, then the excavation depth should be deepened; together to recognize the position following the excavation no other devices (such as cables, pipes, etc.), street no long-term top shade objects, or to replace proper orientation. 2. In the vertical orientation luminaires reserved (excavation) fit standard 1 m 3 pit; embedded parts were pouring position. Embedded parts placed in the middle of the square pit, PVC pipe threading end embedded parts in the middle, and the other end on the battery storage (as shown above). Pay attention to adhere to embedded parts, ground floor with the original in the same horizontal plane (or screw top with the original ground at the same level, according to workplace needs may be), there should be parallel with the side of the road; so only after the poles erected to ensure the rules and not skewed. Then fixed with C20 concrete pouring, pouring process or deactivate a sensation sensation stick to ensure that all of compactness, fecundity. 3. At the end of construction, clean positioning plate residual sludge and waste oil to clean the bolt impurities. 4. concrete condensation process, to regularly watering and maintenance; to be concrete thorough condensation (usually 72 hours or more), competence were chandeliers devices. Battery pack device