JWM turbo lift, turbo lift, high speed

 Use worm gear There are many areas that need attention, and often have a lot of customers do not pay attention when using these details, resulting in deceleration opportunity to produce a variety of problems, today Xiaobian gave you explain the worm gear machine should pay attention to details. 1, using the worm gear should be noted: the working load limit during operation, worm gear, the work within a reasonable period, to avoid prolonged work overheat. 2, the standard worm gear functioning, stable, no vibration, no noise TP turbo lift, no leakage, no impact, if unusual circumstances turbo lift, should be eliminated, not less than two hours test run . 3, gravity hammer shell reducer is not possible to avoid damage; 4, carefully check worm reducer QWL turbo lift, tighten fasteners, safety checks done; 5, if carefully measured conventional lubricant requirements (Standard Oil ), to ensure lubrication workplace; 6, after worm gear load test run for some time, check for loose fasteners, etc., to ensure their safe operation; screw lift, also known as screw jacks, according to the movement can be divided into screw sports, sports nut, sports nut R type: Normal gear screw jacks, safety nut screw jacks, ball screw jacks. Screw lift lifting force range in 500KG to 300T, the maximum input speed of 1800 rev / min, with reducer, commutator, etc. used in combination to achieve absolute synchronization mechanical lifting system. We screw lift in the selection process, the response screw lift avoid withstand lateral forces, while taking the lead, guide and so counteract lateral forces aligning nut or screw jacks. In general, the ordinary screw gear screw jacks large reduction ratio models have self-locking function, a small reduction ratio is uncertain self-locking in the security situation and the situation must be configured brake vibration. Input power screw jacks under normal operating conditions must not exceed the maximum input power (input power KW = (full load torque Nm × rate × input speed rpm) / 9550), the temperature of the environment will also affect the maximum input power screw lifts. JWM turbo lift, turbo lift, high speed provided by Tai Machinery Co., Ltd. Dezhou. Dezhou Tai Machinery Co., Ltd. (www.qitaijixie.com) strong, credible, in Dezhou reducer, gearbox industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Tai machinery and you work into the brilliant, for a better future!