Shandong Falkenhausen fan

GY4-73 lead through boiler centrifugal fan is suitable for power plant 2 ~ 670T / h steam boiler pass, citing fan system. In no other special requirements, GY4-73 also be used for mine ventilation and general ventilation. Fan transmission medium is air, the maximum temperature does not exceed 80oC, media quoted Fan transmission of gas, the maximum temperature not exceeding 250oC. Fans must be installed in front of the lead except apparatus, according to the general plant use, not less than 85% removal efficiency. ? Y9-35 boiler centrifugal pass, induced draft fan is fueled with a variety of media and is equipped with smoke and dust removal device 0.2-20t / h industrial boiler or boiler supporting the design of life, there are C-type and D-type transmission; however delivery gas temperature can not exceed 250`C, over 250`C. ?? 9-19-pressure centrifugal fan can be widely used in transportation of materials, not spontaneous combustion air and non-corrosive, non-sticky material gas. Transport medium temperature usually does not exceed 80 ℃, the system contained in the dust and hard particles is not greater than 150 mg / m3. Suitable for general material handling blacksmiths, glass, ceramics, radio, electroplating, batteries and other industries high-pressure forced ventilation and food, feed, ore, plastic and other processing industries. ? 4-79A-type centrifugal fan can transport air and other non-spontaneous combustion, harmless, non-corrosive gases for steel. Allowed to sticky substances contained in dust and particles should not exceed Hard 150 mg / m3 in the gas. Gas temperature must not exceed 80 ℃. The fan has a good aerodynamic performance, impeller, belts are strictly static and dynamic balance, it is smooth, vibration, high efficiency, long life and other characteristics. Widely used in industrial and mining enterprises, large buildings, hotels, restaurants and indoor ventilation exhaust. 4-2x79E type centrifugal fan can transport air and the other is not spontaneous combustion, harmless, non-corrosive gases for steel. Allowed to sticky substances contained in dust and particles should not exceed Hard 150 mg / m3 in the gas. Gas temperature must not exceed 80 ℃. The fan has a good aerodynamic performance, impeller, belts are strictly static and dynamic balance, it is smooth, vibration, high efficiency, long life and other characteristics. Widely used in industrial and mining enterprises, large buildings, hotels, restaurants and indoor ventilation exhaust. ? 4-72 centrifugal fan can transport air and other non-spontaneous combustion, harmless, non-corrosive gases for steel. Allowed within the gas-containing viscous material, contained in the dust and Hard particles should not exceed 150 mg / m3. Gas temperature must not exceed 80 ℃. The fan has a good aerodynamic performance, smooth operation, small vibration, high efficiency, long life, a total of A, B, C, D four structures. The fans are widely used in industrial and mining enterprises, large buildings, hotels, restaurants and other indoor ventilation. C6-46 type centrifugal fan Dust contains essentially apply to the carriage of debris, fibers and dust and other air mixture, medium temperature does not exceed 80 ℃, can also be used as a general ventilation. The fan has six forward curved blades, with easy to dust, wear-resistant characteristics. The fans are A-type and C-type transmission, can also be made D-type transmission. ? C6-48 Dust-type centrifugal fan is the fan industry jointly designed Dust dedicated fan. This series of fans, with easy to dust and abrasion resistant, and suitable for the carriage containing dust, wood chips, fine fiber and other gases (to be added in front of the fan and dust removal device if hard particles), can also be used as a general with ventilation. T30 series axial fan is 30K4-II type based on the improvement, with a reasonable structure, high blade strength, low noise, high efficiency, this fan is divided into common type and the opening and closing type two kinds. Mainly used for high temperature gas extraction or carriage and other oil, water, dust, gas, the output is non-flammable, non-corrosive, non-significant dust gas, medium temperature ≥80 ℃, but also as a general industrial piping pressurization and air supply and exhaust purposes.