Combination of steel formwork model, wenshui Unitas steel template (certified), Luliang steel formwork

 A steel template must be checked one by one, in line with production quality standards are allowed to leave the factory. Two in custody during the steel template, template response contact with the concrete surface coated with anti-rust oil, paint the back should be subject to a partial loss supplement brushing. Third, the steel template, whether in the warehouse or the specifications shall classify all stacked on site, stacked neatly, not any misplaced. Fourth, the steel template should be stored indoors as much as possible, or placed at the scene of the shed, in the open air should be covered with canvas or metal to prevent rust. These aspects of the operation of the old large steel template, processing, knowledge is something that many small, if introduced all at once finished, the content too much, the reader may not be able to accept all, it is better to describe the operation of the old big batch of steel formwork processing, this effect will be better, it will be a gradual learning, firmly grasp it to expand on the details below. 1. Quality inspection of each procedure to go through inspection, and make the appropriate records, failure is reworked until qualified so far. 2. Brush rust templates and angle mode, have to carry out before brushing paint surface cleaning, brushing and unified steel box girder template price, brushing uniform, but also cook mark, but the board does not have the paint surface . 3. Large template attachment processing, cleaning (1) after cooling to be tempered composite steel price, and then use the forming tooling. (2) welding, the weld length can not be less than 80 mm, height can not be less than 8 mm, and can not have a bite of meat phenomenon. 4. Clean the old big steel formwork accessories (1) Annex should be cleaned, if open welding or deformed steel template, you should be treated. (2) where there is damage, replace if necessary should be replaced, and the connection to the old big steel template correctly. 5. Quality Control (1) shall be qualified materials, and the operator should certificates. (2) The next material to be accurate, group fight to choose the place of hollow plate girder steel template, drilling position must be accurate. (3) If the project is large and complex, so a good future in the processing of steel template, the first pre-assembled, so that the overall quality checks to avoid problems. Combination of steel formwork model, wenshui Unitas steel template (certified), Luliang steel template provided by the text of water Unitas steel formwork Limited. Wenshui Unitas steel formwork Limited (www.jlgmb.com) Shanxi Luliang, stainless steel and products of leaders, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In the text of water Unitas steel template leadership with the staff warmly welcome all inquiries negotiations to create the text of water Unitas steel template a better future.