GB valve

Valve is a small fluid resistance, apply pressure, high temperature and other characteristics, is one of the most commonly used cut-off valve, cut off or connected to the line media. When full flow through, then the pressure medium to run minimal loss. Valve is usually applied to less frequent opening and closing, and keeping the shutter fully open or fully closed condition. Not suitable for use as a regulator or throttling. For the high-speed flow of medium, open the gate in local conditions can cause vibration of the gate, while the vibration it might damage the gate and seat sealing surface, while the throttle damper will suffer erosion of the medium. Pressure: PN100 Diameter: 80 Material: WCB Products: GB pressure valve has a small fluid resistance, sealing surface by erosion and erosion of small media. , Open and close more effort, medium flow unrestricted, non-spoiler, do not reduce the pressure, body simple structure, length short, good manufacturing processes, a wide range of advantages. GB high pressure gate valve opening and closing parts is, the direction of movement of the fluid direction perpendicular to the gate, gate can only be fully open and fully closed, can not be adjusted and the throttle. Valve has fluid resistance, sealing surface by erosion and erosion small media. , Open and close more effort, medium flow unrestricted, non-spoiler, do not reduce the pressure, body simple structure, length short, good manufacturing processes, a wide range of advantages. GB pressure valve types, according to the sealing surface configuration can be divided into wedge gate-type valve and parallel gate-type valve, wedge gate-type valve can be divided into: single-gate type, double plate and flexible gate type; parallel gate-type valve can be divided into single-gate type and double plate. Divided by the threaded stem position can be divided into two clear shot valve gate and dark bar. GB pressure valve operating modes: manual, gear transmission, electric, pneumatic