PTFE wear agent anti-wear agent wearable pink dripping ptfe

Adhesive wear powder ptfe ptfe wear agent anti-wear agent is obtained by a special synthetic low molecular weight PTFE polymer powder. Add to suit a variety of plastics, non-stick coatings, coil coatings, powder coatings, inks, lubricants, grease them. Application of a variety of plastics can be added as an additive, the increase in wear resistance of the matrix resin, after reducing the surface friction coefficient of the sliding performance can be improved directly ptfe wear agent and the resin powder mixing, granulating extrusion; also be ptfe wear agent is added to the molten resin (side feeding to screw melting section). Generally built an addition: 5% -30%. Case Study: thermoplastic injection molding products, the PC, POM, nylon, PPS, PEEK and other gears, bearings, computer keyboards, the base material as an additive gives good release of the elastomer, improve the wear resistance of materials reduce surface friction coefficient and improve labor intensity song. Adding generally recommended dosage in rubber mill process: 15% -40% Applications: Silicone ring, NBR products, EPDM as an additive to improve the printing ink ink abrasion resistance, surface smoother, improve smoothness and reduce mechanical blockage of the printing process, in the process of adding raw ink directly proposed addition of 3% compared with the mixed powder wax wax and wax emulsions, add the amount of lower and higher efficiency. 2, Applications: lithographic, gravure, heatset inks, sheetfed offset inks, metallic inks, UV inks recommended as an additive in a coating amount of addition (non-stick coating): 5-30% recommended dosage (other coating) : 3% during paint production, with resins, additives or triturated mixing evenly, to ensure that the powder has good dispersion in the matrix. Powder added can impart better abrasion resistance of the coating, reducing the surface "sticky", to improve hydrophilicity of the surface, and other surface texture modification. 3. Application: cooking utensils, cookware, high-quality coatings, UV varnish, marine paint, plastic paint, aluminum paint, wood, rolled steel paint, add the amount of the additive in the oil and grease recommendations: 5-40% directly in the formulation add, also can put powder in to add wetting system, reducing wear to reduce surface friction coefficient and improve the stability of thickening applications: high-viscosity oil, aerospace, ski, features and advantages of a camera parts, add-resistant ptfe After grinding agent, can reduce the friction coefficient and improve the anti-friction properties and scratch resistance, lower surface energy and improve the non-sticky. Improve the resin chemical resistance and temperature resistance. 2, ptfe wear agent particle size of micron level, are particularly vulnerable to disperse, effectively improve the efficiency and reduce the usage, thereby reducing the overall cost. 3, 4 transport and storage easier, an appropriate increase in the physical properties of the resin 5, 6 good thermal stability, good chemical resistance typical performance (following data can not be used to develop standards) bulk density: ASTM D4895 425g / l Melting point: ASTM D4894 325 ℃ Appearance: free-flowing powder of active ingredient: 100:% particle size: ≦ 5um Color: White factory direct selling price, cheap, large more favorable. Sincerely look forward to working with you! Advanced Materials Co., Ltd. Hubei Xinmao ||| ptfe adhesive wear agent wearable pink