Dual-axis rail suppliers CPC | CPC dual-axis rail | axis drive

 Because carrying the ball point contact with the shaft, so the use of the load is small. Minimal friction ball rotation, which can get high-precision smooth movement. Plastic linear bearings are self-lubricating properties of a linear motion system, the biggest difference is the metal with the metal linear bearing linear bearing is rolling friction, is the point contact between the bearing and the cylinder axis CPC dual-axis rail providers, so this for low-load high-speed movement; and the plastic sliding friction between linear bearings, bearing surface contact with the cylinder axis is CPC dual-axis rail manufacturers, so this for high-load low-speed movement. Linear bearings are used in conjunction with hardened linear drive shaft. For infinite linear motion system. Ball and hardened shaft load because it is a point of contact, allowing the load is small, but the dual axis linear motion guides CPC, minimum friction, high precision, fast movement. If oil lubricated bearings straight line, do not remove anti-corrosion oil, according to the temperature change can be used VG15-100 ISO viscosity grade oil. Shaft lubrication from the supply pipe to the CPC did not double-axis rail manufacturer, or from the outside of the hole to the oil bearing housing. Because seals will scrape oil, oil lubrication NA nonporous with a ring bearing. At the same time, the proposed tolerances and linear bearing bore diameter and the optical axis to use. Typically, the bearings are preloaded can not add, but high-precision, light preload can be applied to the bearing, however, the diameter tolerance of negative data in the table should not be exceeded. Dual-axis rail suppliers CPC | CPC Dual-axis rails | transmission axis by axis Transmission Machinery Co., Ltd., Jinan. Jinan axis Transmission Machinery Co. (www.jndunmu.com.cn) is a professional, "through ball screws, linear guides, linear axis and the famous brands of imported bearings" company. Since its inception, we adhere to the "good faith, sound management" approach, the courage to participate in healthy competition in the market, so that the "axis drive" brand has a good reputation. We adhere to the "service first, customers first" principle, so that the central axis of the drive to win the trust of customers in all linear motion bearings, and establish a good corporate image. Special Note: This information is for reference pictures and information, please contact us to obtain the most accurate information, thank you!