Baoding water and milk epoxy epoxy clay mortar epoxy clay factory direct prices

 Contact Manager Li Tel 18801341411 ECM water and milk epoxy epoxy clay mortar [Features] 1, with impermeability, frost, salt, alkali, corrosion-resistant properties of weak acid, and with a variety of materials, adhesion strong. 2, in the wet surface of the substrate construction, without drying, in a humid environment or hardenable underwater. 3, easy operation and construction, with ordinary cement mortar construction, easy to clean, it can be cleaned with water. Scope 1, applies to defects in the surface of the cellular concrete structures, vulnerability and exposed tendons and other treatment, airport runway repair special materials. 2, stick made of steel reinforcement and leveling the underlying carbon fiber reinforced when sticky. 3, can be used as water, saline areas and chemical plants and other corrosive environments, corrosion-resistant materials. 4, for the underground pipeline corrosion requirements, plant dry cooling towers, chimneys, and a variety of chemical structures, plant buildings have maintenance corrosive gases. 5, acid brick paste special material technology project performance parameters to detect the flexural strength test results] [28d ≥6.0 6.94 Mpa compressive strength Mpa] [7d === 25 28d> 20 45 neutral resistance [mm] 28d < 5.0 1.8 Mpa] [bond strength at room temperature normal 28d> 1.0 2.8 thermal cycling 28d> 1.0 2.4 permeable amount [g] <20 15 24h water absorption [g / m3] <1000525 absorption coefficient [kg / c㎡.h0. 5] <0.5 0.32 corrosive acid properties Name concentration of sulfuric acid corrosion PH = 2 Soak a year with no loss, no leakage hydrochloride 2% a year with no loss soaked, no leakage of sodium hydroxide 10% a year without soaking off, soak a year without a saturated solution of sodium oxide leakage no loss, no leakage use 1, check the product packaging intact, check the label is correct. 2, open the lid, the bucket 3 bags marked A, B, C ingredients removed. 3. A material, B material after shaking, were poured into the bucket and stir evenly, then marked with a "C" for stirring the powder into the barrel slowly, stirring into a uniform mortar like you can. If more viscous or difficult to stir, this package can be added to 1-2kg of clean water and stir, does not affect the final performance of the product mixture. Note 1, the product of cement-based materials, it is completely curing time required 28 days, the FDA can be carried out under a 24h after the procedure. 2, marinated epoxy mortar should be used up within two hours, during this time, such as thickening of the situation appears to dry you can add the appropriate water and stir well before using. Packaging and storing 1, the product packaging specifications 20kg ± 0.5kg / barrel, tooling Group A 15kg / barrel, B 45kg / barrel, powder 40kg / bag 2, unopened shelf life of 12 months, beyond the shelf life is subject to inspection only after continued use qualified. 3, non-toxic, odorless, non-flammable, non-explosive, in line with environmental protection requirements, according to general cargo storage and transportation. Solemnly declare that this product beyond the control of the manufacturer, the Company does not assume any liability arising as a result of improper use, please refer to the instructions when using this product, related questions, please consult your local dealer or our technical service department.