After the supply pressure of heavy vehicles damaged pavement - Professional repair materials

 X50 high-strength polymer repair mortar is a major polymer repair mortar for concrete structures reinforced concrete structures and surface repair construction defects dedicated two-component polymer cement-based mortar. Has a high compressive strength, adhesion, crack resistance and water resistance. Features 1. reinforced protective properties have been corroded reinforcement can play a protective patch performance, and good durability. 2. both dense and good water seepage. 3. Old concrete base has good adaptability, strong bond. 4. Can grass roots in wet and humid environment, construction, may be discontinued without conditions of partial repair. 5. Operation convenience provincial workers, in the intensity of gas corrosive environment, alternative organic coatings, and resin-based material simple construction and low price. ■ Performance Indicators Project technical indicators measured compressive strength (Mpa) R3≥20 35.1 R28≥55 56 flexural strength (Mpa) R3≥4 7.1 R28≥12 13.5 Tensile strength (Mpa) ≥2.5 2.5 impermeability grade (Mpa ) ≥1.5 1.5 ■ Applications 1. steel wire mesh reinforced concrete structures. 2. Industrial and civilian facilities in reinforced concrete buildings have cracked the surface or, panels, load-bearing columns, beams loaded with plaster repair. 3. mildly corrosive vapor, and liquid environment protection works of reinforced concrete, and can replace part of the organic coating. The other is corrupt and can not meet the design requirements of industrial and civil buildings repaired. Especially suitable for repairing floors, decks and open sheet structure. ■ Note 1. Construction temperature above 5 ℃, not on rainy days, when the construction freeze. 2. The high-strength polymer mortar with the mix with use. Save more than 3. 5 ℃ cool dry place, the shelf life of six months ■ X50- use of high-strength polymer repair mortar can do the whole repair the protective surface layer of concrete, masonry or steel wire mesh and reinforced concrete structures on the surface. When the mortar construction, surface of the substrate requirements clean, dust-free, oil-free, non-corrosive chemical residues. Surface of the porous materials should be pre-soaked in water, steel base surface rust should be removed. X50- high-strength polymer repair mortar for construction of the ambient temperature should be 10-30 ℃. Not less than 5 ℃. Emulsion and powder materials should be stacked separately, not damp, rain, sun and debris contamination. Winter freezing measures should be taken.