Bevel swing gate bridge

 Product Name Product Model Bridge bevel swing gate swing gate YXL-B2X01 About Intelligent swing gate is the result of years of careful development, development and production of intelligent channel management equipment, is the main channel for the intelligent management personnel of high-tech products. The equipment will be mechanical, electronic, microprocessor control and a variety of identification technologies organically integrated by matching various identification system equipment and the use of reliable security protection devices, alarm devices, directions, and expand friendly The LED count display interface, coordinated realization of intelligent control and management of the channel. Intelligent swing gate can be easily compatible IC cards, ID cards, barcode cards, fingerprint reader to identify devices that provide access to personnel civilization and orderly passage way to effectively manage personnel access. It can be widely used in railway stations, docks, subways, factories, buildings, intelligent community, hotels, clubs, enterprises and institutions such as the need for channel intelligent management of the occasion. Features 2.1 Standard Product Features: 1) has a self-test and fault alarm functions, user-friendly maintenance and use; 2) the main control board via built by small disk, programmable devices running status; 3) anti-trap, Anti bumps function, when the arm reset Difficult process, within a specified time of the motor automatically stop working again after the default reset delay (until reset), and the intensity is very small (≤2Kg); 4) Anti- impulse function, in the absence of the gate signal is received, the arm automatically locked; 5) synchronization adjustable arm (for the double pendulum case); 6) with automatic reset function, after the gate opening, within a specified time not pass , the system will automatically cancel the access rights of the user; and 7) can be adjusted normally open or normally closed, in order to meet the requirements of different venues; 8) can be used with a variety of devices with card reader attached to the receiver signal relay switch work ; 9) one-way, two-way swing function, one-way or two-way control personnel access; 10) can be directly managed by remote control and management computer; 11) automatically reset delay, the system defaults to 10 seconds after opening (adjustable) automatic reset; 12) automatic power-off arm and laid them out on the power automatically closed, meet fire safety requirements. 2.2 Extensible functions: 1) sound and light alarm, including the illegal intrusion alarm, anti-trap alarm, etc; 2) counting function; 3) IR reset function; 4) chassis lengthened, arm extended and so on. Technical parameters ◇ Chassis Material: Domestic Standard No. 304 ◇ Chassis Size: 1200 L * 300 W * 1000 high (MM) (standard) ◇ arm length: 600-900mm ◇ transmission arm angle: 180 degrees ◇ swing direction: Single or bidirectional ◇ Operating voltage: AC220 ± 10% V / 50 ± 10% HZ ◇ Motor: DC brush motor 200W / 24V ◇ input interface: dry contact signal or 12V level signal or pulse width ≥100ms a 12V pulse signal drive current ≥10mA ◇ communication interface: RS485 standard distance ≤1200 m ◇ LED indicator: a reader window: 2 ◇ pass speed: 40 / min (normally open), 25-30 / minute (normally closed ) ◇ gate opening and closing time: 2-3 seconds after entering the passage ◇ state power on time: 3 seconds ◇ automatically reset time after a failure: 10 seconds ◇ Working environment: indoor, outdoor (shade awning) ◇ Temperature: -10 ℃ - 50 ℃ Relative humidity: ≤90%, non-condensing main structure and configuration of a standard chassis ◇ ◇ ◇ arm a set of control panel ◇ ◇ directional board a transformer a ◇ motor 1 ◇ movement and transmission parts 1 set