Dryer for Screen 1300 * 1000_ Sanheng screen (certified) _ for

 Shengzhou three constant Screen Printing Machinery Co., Ltd. specializes in producing inspiratory handprint Taiwan 1300M (1.3 * 1.0m), inspiratory handprint Taiwan 6080M (60 * 80cm), Shai Banji (Exposure) 1300C (1.7 * 1.4m), 14 Pneumatic Stretching Machine Head, 14 head, netting machines (Stretching Machine) 1.8 * 2.0M, desktop dry easel 1.2 * 0.8m. plate, screen dryer, photographic machines, pressure washing machines, wire network printer, screen printing laboratory equipment. Shengzhou three constant Screen Printing Machinery Co., Ltd. specializes in producing box-type plate, inspiratory handprint Taiwan, screen printing, screen for inspiratory handprint Taiwan dryer 1300 * 1000 screen for dryer, drying rack., Etc. equipment. Box Shai Banji: equipment chassis should angles, square steel and A3 steel welded chassis front of the opening of a door should be easy to replace the lamp. Machine surface spray treatment should be carried out, should be coated black chassis. (2) Maximum screen frame of the device can be used 1300mm * 1000mm. (3) the table surface to a thickness of not less than 10mm of glass, the glass requires no bubbles, no scratches. (4) The equipment should be used with this unit compatible oil-free vacuum pump vacuum. (5) exposure control digital timing device should be used for suction handprint Taiwan 1100 * 800, according to different photoresist set a different time, the exposure time control interval 0-600 seconds, to be precise to the second. (6) Shai Banji should use a dedicated copy blanket and special vacuum seal. (7) Equipment shall be fitted with a vacuum gauge, vacuum degree when work should be able to reach 50KPa more. (8) devices on both ends of the frame should be fitted with gas spring for easy opening and closing the box. (9) The equipment cabinets shall not be less than 14 uniform UV lamp for drying rack 1200 * 800, to ensure uniform illumination proofing performance when more than 80%, the box should be equipped with a yellow light bulb, to facilitate the darkroom right version. (10) The device power is not less than 1.1KW, 220V single-phase power supply. (11) at the bottom of the device should be fitted with casters for easy mobility and maintenance. (12) The device plane size should not exceed 1800mm * 1500mm. Dryer for Screen 1300 * 1000_ Sanheng screen (certified) _ provided for by Shengzhou three constant screen printing machinery Technology Limited. Shengzhou three constant Screen Printing Machinery Co., Ltd. (www.syj88.com) is an industry leader in Shaoxing, Zhejiang, printing equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Constant screen in three leadership with the staff warmly welcome all inquiries negotiations to create three permanent screen even brighter future.