Supply Nanning fume hoods, fiberglass fume hoods, fume hood manufacturer Nanning

Nanning fume hoods, fume hoods price Nanning, Nanning factory direct fume hoods fume hoods parameters: 1, resist materials, steel framework for the production, the base for melamine (particle board) 1-1 countertops resist: laboratory dedicated 12.7mm laboratory dedicated laying solid core physiochemical board. 2-2, the upper and lower part of the cabinet and door 2. Case Material: 2-1 with a new 1.2mm thick galvanized steel production, through the anode plate membrane treatment. EPOXY coated paint acid burn treatment. * More in line with the thickness of paint steel paint, coating adhesion degrees (square) test. 2-2 interior materials (side, back, roof, spoiler): the use of physical and chemical plate 5mm thick. 2-3 sets hood: The new 1.2mm thick galvanized steel production, through the anode plate membrane treatment. EPOXY coated paint acid burn treatment. 3. Adjust door system: 3-1 activities sliding door: single down operation, with a balancing device, sliding door activities can be stopped at any point. 3-2 Sliding Glass: 5mm thick tempered glass. 3-3 sliding door suspension tightrope: cable pull 450 kg, in line with CNS1111 G2009 tensile test reports. 3-4 glass handle: The new 1.0mm thick galvanized steel production, EPOXY coating. 4, the power supply unit: 4-1 protective devices: power supply, motor, socket, leakage fault protection. 4-2 lighting device:. 40W fluorescent lamps. 4-3 sockets: mining 220V single-phase grounding outlet. (Installed in the cabinet) 5. Drainage: 5-1 laboratory Cup slot: the use of PP body shape, thickness 5mm flexible, and acid and alkali, heat and organic solvents. 6. water supply device: 6-1 supply Hancock: Using copper single-port water Hancock. 7: Ventilation System: Line 6 380V outdoor centrifugal fans, silencers, fan base and shock absorbers; duct ￠ 315, ￠ 250 PVC material, duct hangers, distribution box wire / cable, etc., can be designed according to the site .