Steel formwork production plant _ wenshui Unitas steel template (certified) _ Luliang steel formwork

 1, light weight, large plate width than the combination of steel formwork reduce weight 1/4 to 1/5, the template plate width can be increased, reducing the template group to fight the seams. 2, reduce the amount of steel can reduce the ratio of combined steel formwork 1/2. 3, the template adsorption force is small, stripping easy. 4, turnaround times and more, and can use 50 times turnover. Combination of steel formwork safety requirements, the main contents are: (1) a combination of steel formwork installation sequence is generally bottom-up, once the template in place to install the plug immediately after bolt of fastening bolts must be installed. At the same time, you want to set up a good support to ensure the overall stability of the template, as well as to be qualified welding brace. (2) If the template requires assembly, then you should somehow operating platform, the platform should be smooth, firm and secure. (3) If the template is a layered, segmented to support set, then you want to use the support rods of steel formwork production plant, after the lower steel template securely installed before you can install the upper template. (4) Pre-assembled chunk template installation, you can while seated side correction, but also can be interposed connecting member, but to do a fixed temporary support points to prevent the dumping of the template. (5) bearing template should be designed to advance technology, the need for reliable support system. And before the start of use, and technical personnel to conduct inspection and acceptance, to ensure safe use. (6) in place to install column mode, to use the steel skeleton for the job, but also good safety measure. As well as its supporting steel template, should be solid and reliable. If the column mold height exceeds 4 meters, then you should support the use of four modular steel template, so relatively safe insurance. (7) independent beam template also set when you install the operating platform, if the height of the beam template over 6 m hollow steel template, it should be the erection of scaffolding, plus the fence, so that the operator can safely operate and construction to Anti danger. Steel formwork production plant _ wenshui Unitas steel template (certified) _ Luliang steel template provided by the text of water Unitas steel formwork Limited. Wenshui Unitas steel formwork Limited (www.jlgmb.com) Shanxi Luliang, stainless steel and products of leaders, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In the text of water Unitas steel template leadership with the staff warmly welcome all inquiries negotiations to create the text of water Unitas steel template a better future.