Silane water repellent liquid silicone waterproofing agent of low molecular weight water-repellent liquid emulsion

Characteristics of low molecular silicone aqueous emulsion water repellent FS-150 FS-150 is due to a small molecular weight, and therefore better penetration. Waterproof mechanism is used when the water repellent agent sprayed or brushed on the substrate surface, the substrate surface immediately water-repellent film is formed of a mesh structure, and catalyst under atmospheric moisture, crosslinking continues into a dense resistance waterproofing membrane grinding, and hydrophobic octyl, silicone penetrate into the inside wall of the pores formed in the water-repellent hydrophobic structure. Thus the substrate surface and the interior, forming a three-dimensional net-like water-proof structure, having a double waterproof effect. At the same time have a good waterproof effect, there will be no change to the original color and luster to various substrates. Main Specifications: Appearance: milky white solution PH: 6.0-7.5 Effective content: ≧ 40% Storage stability: 12 months in the liquid seal is not hierarchical. Dilution Stability: 12 months after placement dilution is not hierarchical. Applications: 1. waterproof coating ﹑ waterborne paint additives to increase the waterproof effect. 2. waterproof cement tile pavers ﹑ ﹑ waterproof split brick facades. 3 gypsum board; magnesium silicate (cement) board and other fireproof materials ﹑ perlite board water treatment. 4. ﹑ colored sandstone carved stone waterproofing. 5. Bathroom within ﹑ ﹑ kitchen facades (or affixed split brick facades) ﹑ floors, cement-based surface water treatment. 6. cardboard timber ﹑ ﹑ ﹑ waterproof ceramic composite plates and other materials base surface. 7. The water treatment other materials. Usage: 1. make the surface waterproof material to be treated before brushing or spraying, the dust should be first on the surface, floating ash, slag and other attachments to clean the body dry. 2. The surface treated dry as possible in order to facilitate the effective penetration of the product. 3. Place this repellent watered 8 to 20 times, stir with a fine spray or brush ﹑ sponge brush to the substrate surface, brushing general criss-cross again, not omission, generally one to two times (loose surface structure strengthen waterproof effect, can be brushed twice, the first pass dry and then brush a second time). Stock solution of 1 kg (rear against the thin) coating the substrate can generally 50 to 100 square feet (experience, for reference). 4. There shall be in accordance with the construction requirements against the goods, such as diluted waterproofing agent did not run out, cover tightly sealed. 5. This product active ingredients can penetrate the surface water from the role a certain depth, therefore, be treated as goods after processing with a slight surface cracks are still waterproof effect; for obvious cracks should make up the cracks, then waterproof construction. 7. This product is suitable for 4 ℃ ~ 40 ℃ ambient temperature without rain the environment, construction, low temperature deposition time is slow, high-temperature solution is evaporated too quickly affect the absorption amount, generally one hour film summer jobs, winter jobs about 24 hours film. Construction of the base surface shall not dry before rain washed, usually 48 hours to do closed water test, a week after the Nature Conservancy waterproof better. 8. In the water-based paint, such as water paint, water-based lacquer furniture to add this waterproofing agent must first small test, the reference by about 2-3% of the total weight of the other added. Note: Depending on the material or construction is different, please make a small test area to determine the number and the best watered brush proportions. Storage, transportation, packaging: a cool dry place for storage; aqueous liquid, non-dangerous goods; 25 kg ﹑ ﹑ 50 kg 200 kg drums.