Zhejiang tank pump integrated equipment

Tank pump integrated product features a complete set of equipment, saving investment: investment savings of about 50%, without a roof to build reservoirs or tanks, using layers of water supply, reducing initial equipment investment. 2, energy efficient, low running costs: You can take advantage of the municipal water supply pipe network pressure, how much less, make up, does not produce negative pressure water supply equipment, compared with the traditional energy savings of 30% -90%. Power can be maintained municipal water supply pipe network pressure. 3, the high degree of intelligence, simple operation, saving manpower: The equipment consists of automatic intelligent controller, be adjusted according to the user's own water pressure and water pipe network, the implementation of unattended. And the use of man-machine interface (text, numbers) display, enabling customers to see a more intuitive operational status of equipment. 4, environmental health: The device fully enclosed operation, the complete elimination of secondary water pollution. 5, the protection function: a perfect overload, short circuit, overvoltage, undervoltage, phase, overcurrent, short circuit, water shortage and other automatic protection. In exceptional circumstances can signal alarm, self-test and fault diagnosis. 6, small footprint, easy installation: Only one set of complete equipment supply control cabinet, no negative steady flow tank and pump unit three parts, installation is very simple and convenient. 7, extend equipment life: more than one pump can achieve reliable soft-start, make the grid and pipeline avoid impact, and take turns running, greatly extending the life of pumps and motors. More than three times to extend the life of equipment. 8, the second pressurized-water supply equipment wetted parts materials are generally made of stainless steel, other materials can also be customized according to different requirements of users. Box integration equipment into the water pump and water pipe network is directly connected to the remaining water in the water pipe network pressure-driven equipment pushed into the water, pressure pumping equipment continued pressure on the basis of the remaining water pressure on the water supply pressure increase the pressure required to the user after the outlet pipe network water; when users tap water supply pipe network is greater than the amount of inlet pressure drops, when the device is reduced to an absolute pressure of the intake pressure is less than 0 (or set of pipes When the network protection pressure), the negative pressure device to prevent and control the device automatically starts to work on the equipment running until adjusted standby equipment downtime, ensure that the inlet pressure is no longer net decrease adverse impact on the water pipe network; Changsha, China Vibration Pump Co., when the water supply pipe network the ability to recover, into the water supply network pressure to return to protectionist pressures above, the device automatically starts to restore normal supply; when the water pipe network residual pressure water supply to meet user requirements, the device automatically enters sleep mode to the user directly to the water supply from the water pipe network, lack of water supply equipment to automatically resume operation; when the user does not use water or water is very small, the device automatically enters sleep mode shutdown, maintained by the water side of the device is located in a small flow regulator packing tank the number of users of water leaking pipe network, users of water tank holding pressure regulator can not maintain the required pressure water supply network, the device automatically wake up and resume normal operation. Process equipment running full use of the remaining pressure water pipe network, not always adversely affect the water pipe network also satisfy customer needs, reduce water consumption and achieve optimal operation of water supply systems.