Self-adhesive fiberglass geogrid price | Connaught (certified) | Ningxia fiberglass geogrid price

 Laying fiberglass grating: fiberglass grid laid by tractor or car modification of special equipment for laying, laying fiberglass grating can also be manually marked at both ends of each roll each paper roll products have orange and blue marker in. Start Quote fiberglass geogrid price before laying down rubber should be selected for determining the color of each of the mark at one end, to facilitate the construction of paved surface without glue wrong when laying the grill, keep it smooth, taut, not wrinkle, so the grid with an effective tension, then clean after Puwan drum roller compacted again using fiberglass grating effect is closely related to the handling of paved roads, it must be possible before laying on the road affect the bond strength of the underlying grid and substances such as oil, paint, seal coat material, water stains, dirt, etc. thoroughly cleaned so that the laying of the surface is clean and dry. fiberglass grating on pressure-sensitive water-soluble substances belong to the dorsal-ventral, such as water on road track, it should be dry before laying the road. need sticky layer of oil spilled fiberglass geogrid lowest price before laying grille, sticky layer of oil such as the use of emulsified asphalt, the need to dry completely breaking laying grille In the actual construction, the construction unit using some sticky layer of oil after spraying directly fiberglass geogrid fiberglass grid paving prices immediately after the roller compaction, the better, fiberglass grating is also not easy to wave. Construction quality is good or bad for the future use of fiberglass grating effects have a significant impact. Therefore, it is particularly important to strengthen the quality of supervision, improve the technical level of construction workers seem to make the prevention of anti-radiation effect fiberglass grille maximize, at the time of construction should note the following points: (1) self-adhesive fiberglass grating soluble in water, not construction when rain or wet pavement. (2) strict control mix delivery vehicle access is prohibited vehicle on a grid layer emergency steering, brakes and pour mixture foot material to prevent damage to the fiberglass grating. (3) laying grille, requiring pavement temperatures between 5 ° C ~ 60 ° C. (4) fiberglass grating for glass fiber manufacturing, human skin prone to irritation, construction workers required to wear protective gloves. (5) When using a rubber tire roller need to increase the weight of water Plastic fiberglass geogrid price, it can not be too full of water injection to prevent overflow onto fiberglass grating, resulting in the loss of its dorsal and ventral sticky. (6) laying fiberglass grating process, if found in the original pavement has a small pond to be filled no, you can cut out parts of the corresponding pond will be paved in the grid so that the upper paved asphalt When the material can be completely filled ponds. Self-adhesive fiberglass geogrid price | Connaught (certified) | Ningxia fiberglass geogrid prices offered by Shandong Connaught Engineering Materials Limited. Shandong Connaught Engineering Materials Co. (www.sdliannuo.com) is Tai'an, site construction materials leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Connaught Engineering Materials in leadership with the staff warmly welcome all inquiries negotiations to create the Union promise a better future for engineering materials.