Special reflective powder paint and ink

Xing bright reflective powder is produced by a powder material is made of glass beads, the refractive index is divided into three, namely: ND≥1.90, ND≥1.93, ND≥2.2. Roundness: ≥93%, transparent rate ≥95%, hardness (Mohs): 400, high temperature ≥850 ℃, density: 4.1 ± 0.2g / c㎡, content: 99%, particle size from 150-500 mesh (25 micron -105 micron) grading options, Xing reflective bright pink color into white, silver two kinds of choices. After the [Features] reflective material products with high refractive index glass beads as the latter half of the surface of the aluminum reflector, with a strong reverse retroreflective performance, can 85% of the light is reflected back to the light source directly, reflective retroreflective caused brightness, enable the driver and night operations personnel with a light source in the case of poor vision at night or not clearly see pedestrians and obstacles to the goal, to ensure that both safety. Xing bright reflective powder characteristics: high resistance to oxidation, high temperature, good reflective effect. [Applications] widely used in screen printing, reflective paint, reflective ink, traffic signs, reflective materials. Usage Use a screen printing method :() using the ratio of glue (paint): reflective powder ratio of 3: 1. A water-based screen printing method: reflective powder can be added directly to the reflective pulp, tune uniform (appropriate to add additives to enhance fastness), to printing, printing. Water-based screen printing method two: bright reflective powder can be added directly to the pulp transparent, uniform tone (appropriate to add additives to enhance fastness), to printing, printing. Oily silkscreen method one: reflective powder can be added directly to the varnish, even tone (additives may be added to enhance the fastness), to printing, printing. Oily silk Act II: can be added directly to the ink, made of reflective ink, screen printing or brush onto fabric or other materials, the use of simple operation, easy to master. Add the amount depending on how much to add reflective brightness. Oily silkscreen method three: first primer topcoat reflective printing paste --- --- pulp drying curing Also, note reflective slurry preparation: according to the amount of how much will be the first with a solvent (cyclohexanone) was transferred into a reflective powder weighing paste, and then added to the transparent printing paste, use a uniform tone. When printing, printing thinner layer thickness to 30 microns -50 micron is appropriate to ensure that reflective powder can Banlu surface, producing a bright reflective effect. According to use, the use of thickness ranging from particle to obtain a variety of reflective effect. (Particle size range, reflecting the better) two. Use :( spraying) 1. First reflective paint spray primer, to be reflective paint dry, then spray-reflective finish. If the cement surface construction, the proposed two-reflective spray paint better. 2. It is recommended to use W-71-type gun (nozzle ￠ 1.50 mm) using a primer gun pressure about 2.0Kg / cm2, paint spray gun pressure about 3.0kg / cm2. 3. Construction of the gun and the surface needs to be 18cm, gun angle 45 °, paint thinner film must have obtained good effect. For unknown substrates, prior to being a small area of ??the trial. 4. Do not rain and fog in the snow and other inclement weather construction, will affect fastness. Note: 1. Before using the construction of the surface to be cleaned, the surface free of grease and dry. Reflectors and reflective paint primer must be stirred before construction 2. Uniform; painting process to keep stirring to prevent precipitation of reflective powder. [] Ratio in the addition ratio of the paint: 30% -40%. 【Packing】 25kg / barrel. While root customer requirement. The above information has bright paint Ltd. SHENZHEN provide [forbidden]