Racks with stainless steel wire rope 304 7X7 7X19 1.5-3.0MM stainless steel wire rope wire rope structure 6 * 7 + IWS? The rope type 6 * 7 + IWS, also known as 7 * 7, from the rope technical parameters can be expressed as Rope total, 7 stocks

Material: 304 Structure: 7X7 7X19 Diameter: 1.5 2.0 3.0mm Strength: 1570Mpa Rally: not less than one hundred meters 100kg Weight: 1.5-0.9kg / 100m 2.0-1.6kg / 100m 3.0-3.6kg / 100m with a stainless steel wire rope lifting racks stainless steel wire rope lifting racks belonging to residents' daily necessities, such price rise is mainly used for stainless steel wire rope clothesline pole, according to the weight of laundry clothes rod, stainless steel wire rope requirements must be able to withstand the tension within a certain range, to ensure that the practical range broken wire off shares phenomenon does not occur within. As long racks on the open-air terrace for outdoor or direct its rope withstand the effects of temperature, air humidity, such as poor quality and affect the use of corrosion will occur. Lift racks outdoor long-term use of stainless steel wire rope, its rust-proof, soft performance is the first factor. Racks rope wrapped wheel, steering wheel diameter is small, and the more frequent price rise, thus requiring the use of stainless steel wire rope toughness is better, should be soft. Not perfect, should not be used after the compaction process handled stainless steel wire rope. Typically, stainless steel wire rope lifting racks diameter 1.2-1.8mm, made of 304 stainless steel wire rope. Stainless steel wire rope with 7 * 7 shares consisting of thin wire, at least ensure a longer period using smooth, soft, no rust. Technical requirements for stainless steel wire rope is made of 304 stainless steel, wire rope structure is 7 * 7,7 * 19, from stainless steel wrapped in favor, keep causing large diameter wire rope and reel ratio perspective, 7 * 19 stainless steel wire rope structure has more advantages enough. Requirements for rope diameter 1.5-3.0mm, product technical requirements: 30kg under load conditions, unidirectional lifting stroke 800cm, running up and down times ≥3500 times.