Bucket elevator hopper using different manufacturing materials | Contrel most professional technology

Bucket elevator hopper using different manufacturing materials | hopper Contrel technology most professional bucket elevator can be manufactured using different materials. For example, using steel welding (commonly 2 ~ 6mm thick steel), can also be made of nylon and polypropylene molded or manufactured using malleable iron. Generally manufactured from malleable iron centrifugal discharge hopper for the bucket elevator. Welded steel hopper for gravity discharge of the hoist. Dong Jie bucket elevator hopper common type is A or AA type, the bottom of its hopper is casting round. AA-hopper with reinforced edges dig mouth, although this increase in manufacturing costs, but to get a longer service life. B-type hopper compared with A, has a lower front edge of the mouth, is conducive to conveying the rough, broken off or a larger abrasive materials, such as the tilt bucket elevator conveyor coke, ore, stone, and other Similar materials. C-type leading edge of the hopper opening is flat, suitable for transporting the adhesive and will accumulate in other types of material in the hopper. Other standard model hopper and design provided by the manufacturer. Board chain bucket elevator drive power is small, to take into the feeder, induction discharge, large capacity hopper-intensive layout. When material hoist, almost no material back and digging material and, therefore, invalid less power than the chain hoist 30% power savings. Tel: 0317-5669112. http://www.hbwjcc.com/ssjxl/dstsj.html