Supply JD194-BS series of electrical measuring transducers

 Overview HJD200 electrical measurement transducer electrical measurement transducer is a measurement of the parameters (such as current, voltage, power, frequency factor signal) conversion or isolated DC current, DC voltage device products, digital signal in line with international GB / T13850-1998 single-phase current single-phase voltage transmitter electrical measuring transducers include: AC current transducer, DC current transducer AC voltage transducer, DC voltage transmitter, single-phase power factor transmission , three-phase power factor transducer, three-phase AC current transducer, three-phase AC voltage transducer, active power transducer, reactive power transducer, reactive power / reactive power combination transmitter, transmitter power factor, frequency transmitters and so on. Technical Data Accuracy class index 0.5,0.2 Enter the nominal value of the current AC, DC1A, DC5A, DC20mA; voltage AC, DC100V, DC300V, DC500V, DC75mV Overload Duration: 1.2 times the instantaneous: the current 10 times (5 seconds), voltage 2 times (10 seconds) absorbed power current input ≤ 0.3VA; voltage input ≤ 0.3VA (100V when), ≤ 0.6VA (300V when), ≤ 1VA (500V) Output frequency 50/60 ± 5Hz nominal value 4-20mA , 0-20mA, 0-5V, 0-10V, etc. Current output load resistance ≤600Ω, ≥1000 voltage output ripple content <0.5% of peak response time ≤400ms supply voltage alternating current, voltage class ≤3VA, power class ≤4VA Power consumption between AC current, voltage ≤3VA, power ≤4VA compressive strength of the insulation resistance ≥100MΩ input / output / power 2.0kV / 1min, 50Hz temperature coefficient ≤100ppm / ℃ ambient temperature Operating: -10 ~ + 55 ℃ deposit Storage: -25 ~ + 70 ℃ Humidity ≤90% RH, non-condensing, non-corrosive gases altitude ≤2000m JD194-BS series of electrical measuring transducers