Polyester tire manufacturers, Neijiang polyester tire, just and waterproof material

Polyester tire construction points a waterproofing membrane, the base surface treatment: Requires dry (moisture content <8%), clean, solid, smooth, no dust, no oil. Yang angle should be made rounded nodes parts to pre-treatment; 2, primer coat: To facilitate the construction and coating quality assurance, with CQ110 crack-resistant Granville Special primary treatment agent, grassroots uniform coating, let it dry (about 6-8h) filament polyester tire before proceeding to paint construction; 3, coating application: rubber scraper or brush evenly brown paint scraping the surface of the base tire polyester staple fiber, coated with this product Cover is usually performed three times points, each pass is about 0.5mm thick coating; must wait after a dry coating (about 6-8h) before proceeding with the next coat applied during the construction; 4, do the isolation layer : Coating hard work (about 3d), a layer of non-woven cloth or fiberglass for isolation layer (30-50g / m) at its surface; 5, the reference amount: Paint: 2.3-2.5kg / m (thickness To 1.5mm) primary treatment agent: 0.2kg / m polyester tire choice points waterproofing membrane. 1, I-type membrane has good low temperature flexibility, greater elongation characteristics, for general and mid-range building roof (rigid protective layer) and underground works. 2, Ⅱ membrane tension type I membrane relatively large, low temperature flexibility and better. Suitable for cold areas, the high-end architectural roofing and underground works. 3, single-use, the thickness of not less than 3mm; Second Road and Second Road over fortification, waterproof roofing project membrane thickness of each layer should not be less than 2mm; waterproofing of underground works not less than 3 mm. 4, when used in underground engineering polyester tire, shall meet the steam vapor transmission rate ≤5.7 × 10-9g / (m? S? Pa) requirements. 5, aluminum foil surface membrane for roofing, can be directly exposed to use, but should meet the requirements of the artificial climate accelerated aging performance indicators. 6, polyethylene film and fine sand surface membrane for roofing, protective layer needs to be done. 7,1.5㎜ thick self-adhesive waterproof membrane is used only for the auxiliary. Polyester tire manufacturers, Neijiang polyester tire, just and waterproof materials provided by Shandong exactly and waterproof material Limited. Waterproof Materials Co., Ltd. Shandong and just (www.qiahefangshui.com) (www.qiahefangshui.com) strong, credible, Shandong Weifang waterproof, moisture-proof material industry has accumulated a large number of loyal customers. The company better work attitude and continuous improvement and innovative ideas will lead exactly waterproof material and you hand into the brilliant, for a better future! You can also access (www.qiahefangshui.com/supply_details_49712745.html), for more information about the company.