Feed mill laboratory fume hoods, laboratory fume hood Zhichang, pharmaceutical laboratory fume hood

Handle Description: matt stainless steel handle. Spoiler Description: 5mm gray anti-mining special times, acid corrosion laboratory dedicated organic solvent materials. Power Description: The laboratory dedicated power outlet. Window Description: Aluminum frame with plastic profiles, window using three 5mm safety glass, can move around and use stepless balancing device can move up and down freely adjusted. Adjustable feet Description: The diameter φ10mm injection adjustment feet, shock, moisture, corrosion resistance, can be adjusted according to the height of the cabinet interior floors, maximum adjustment for 0-30mm. Set hood Description: The PP material distribution box Description: 220V and 380V power supply in line with the requirements, there is leakage and electrical protection devices. Control switch Description: 12V touch switches, centralized control of the entire circuit system Process Description: All steel welded after epoxy powder spray chart, visually smooth and no joints. All water, electricity, gas and road safety requirements, applicable, and hidden installation. After the cabinet backplane design service hole. Three baffles at different heights so that the space of harmful gases were discharged from the different segments area. Fume hood face velocity to the speed of operation of 0.5m / s in the hood of the air, to ensure that no residual gas is present. High efficiency ventilation, exhaust volume is about 1600m3 / h, and noise. Lower cabinet (general type base cabinet), Door: 1.2mm cold rolled steel (double), solderless connection with removable cushioning. CNC machining centers, cutting, positioning drilling, bending welding forming, acid phosphate treatment epoxy powder coating curing temperature baking. Tops, high-quality laboratory dedicated 12.7MM solid core physiochemical board, the temperature is good, more resistant to acid, alkali. Have good physical properties and good load bearing properties. Technical parameters: Operating mouth wind speed: 0.3-0.5m / s exhaust volume range: 2000-2500m3 / h Noise: ≤65dB fan power (KW): 0.30KW Voltage (V): 220 Model: TH-250 HIP: 360pa speed: 1450 (r / min) Exhaust diameter: 250mm ventilation ducts: about 2 m / PVC pipe, configuration directly elbow. (Optional) Shell Description: The shell is made of high quality 1.2mm cold rolled steel in CNC machining centers, tailoring, positioning drilling, bending welding forming, acid phosphate treatment epoxy powder coating curing temperature baking. High adhesion, surface hardness strong corrosion resistance, beautiful appearance. Inner shell Description: The special anti-fold 5mm gray, acid corrosion laboratory dedicated organic solvent materials. Repair holes, a detachable, easy to repair circuit, water, gas. Fluorescent Description: Fluorescent hidden in the panel, not in contact with the air flow inside the fume hood, easy to replace. Using a 30W fluorescent lamp, and a 5mm tempered glass. With electric valve, adjustable speed, control airflow duct. (Optional) Configure the corrosion laboratory dedicated PP sink and gooseneck faucet. (Optional) Specifications: 1200 * 850 * 2350mm 1500 * 850 * 2350mm 1800 * 850 * 2350mm