PP white oil-resistant ink

First, the substrate: PE, injection PE, blow PE, HDPE, LDPE, PP and other plastic surfaces. Second, product characteristics: good adhesion, scratch-resistant adhesive and ink means no loss, slow-drying ink, fine particles, good leveling, prints can be heated molding, ink is not broken. Adhesion, scratch resistance abrasion test project Acid Alkali heat resistance test results good lightfastness 4 4 3-5 4-5 grade level 4-5 5-8 grade level three, product technical parameters: Item Hue color density fineness viscosity gloss fluidity Solid content parameter reference color chart below 8% -15% 5u 70-120p 75-85 15-20mm / s ≥45% Fourth, use: (1) screen printing stencil: 200 -420 mesh polyester screen printing plate Squeegee: 65-85 degrees is recommended polyurethane squeegee Dosage: 300 mesh screen printing is about 35 square meters / kg Stencil Cleaning: use of organic solvent cleaning (eg: wash water) (2) printing drying: natural drying (dry 7-15 minutes, hard work more than 30 minutes) or below 100 ℃ hot air drying solvent selection: 719 quick-drying water, 718 dry water, 783 slow dry water, due to the printing environment Select different temperatures V. Note: 1. When using the ink for printing, adding an appropriate amount according to the actual needs of the withdrawal of pale ink viscosity adjustment agent, but may affect the ink itself gloss Please testing. Six, product packaging: 1 kilos and 5 kilos and 20 kilos seven storage conditions: 5 ℃ -25 ℃ conditions can be stored for two years, to avoid glare, anti-contact acid and alkali.