Hubei Chemical Factory cold water | Wuhua chiller | Eastern Star Refrigeration

 Chiller is a machine by removing the liquid vapor compression or absorption refrigeration cycle heat. Vapor compression chillers include four major components of steam compression refrigeration cycle (compressor, evaporator, condenser Hubei Automotive chillers, forms part of the metering device). These machines can implement different refrigerants. Benign refrigerant and urban water absorption chillers using silica as a desiccant. Absorption chillers using water as a refrigerant, and rely on between water and lithium bromide solution, in order to achieve a strong affinity for the cooling effect. In most cases, pure water is chilled, but the water may also contain a percentage of ethylene glycol and / or corrosion inhibitors; such as thin oil, and other liquids can be chilled. 1. Solution pump - A dilute solution of lithium bromide absorption shells collected at the bottom. From here, a sealing solution by moving the pump shell and tube heat exchangers preheated solution. 2. After the generator exit, heat exchangers - lean to the upper shell solving action programs. The solution around the tube bundle any steam or hot water. Steam or hot water to dilute lithium bromide solution heat the pool. The solution boils, condenser, refrigerant vapor into the concentrated lithium bromide up to leave behind. Concentrated lithium bromide solution moves down the heat exchanger, where it is a weak solution is pumped to the generator cooling. 3. Condenser - migrate to the condenser tubes by refrigerant vapor mist eliminator. The refrigerant vapor condensing on the pipe. The heat is removed by cooling water to move through the inner tube. As the cold refrigerant concentrated Hubei Chemical Factory, which collects in the bottom of the condenser at the bottom. Before you screw chillers start: correct debugging screw chillers is to ensure the normal operation of the cooling device, save energy and prolong the life of an important part. For large and medium-sized refrigeration systems on-site installation, prior to commissioning the first design drawings should be familiar with the layout and connection of the system to understand the shape of the structure and components of the performance of each device, and electronic control systems and water supply systems. To this end, the debugger should have refrigeration and hydropower engineers to participate. Users should carefully read the manufacturer's products provide operating instructions before commissioning, according to operational requirements gradually. The operator must be trained factory, access to the unit's operating certificate to induction operation, in order to avoid wrong operation caused fatal damage to the unit. 1. Preparation prior to commissioning (1) due to screw chillers belong to the large refrigerator, so the need to design debugging closely with installation, use three aspects. In order to ensure the orderly conduct of commissioning work, it is necessary to temporarily commissioning team personnel by the parties concerned, the overall command for debugging work. (2) personnel responsible for commissioning the screw should be fully familiar with the structure and performance of Hubei brine chiller chiller, refrigerator familiar with security technology, specifically debugging methods, procedures and technical requirements to be met to develop a detailed and specific debugging programs and each post commissioning tasks and define their requirements. Installation (3) Check the screw chiller meets the technical requirements, ground screw chiller meets the requirements of connecting pipe size, specifications, material meets the design requirements. (4) Unit power supply system should be fully installed by debugging. (5) separately in cold water and cooling water systems through the water test, rinse the dirt water system, the water pump should work, the cycle of water in line with the requirements of working conditions. (6) to clean up the site debugging environment, to clean, bright and smooth. (7) ready for commissioning of various common tools and special tools required. (8) is ready for debugging required for a variety of pressure, temperature, flow, quality, time and other measuring instruments, meters. (9) ready for commissioning safety protection equipment required during operation. Hubei Chemical Factory cold water | Wuhua chiller | Eastern Star Refrigeration is provided by Shenzhen East Star Refrigeration Electrical Limited. Shenzhen East Star Refrigeration Electrical Co., Ltd. (www.szdxj.com) (www.dx16888.com) strong, credible, in Shenzhen, Guangdong province heat, refrigeration and air conditioning equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the Eastern Star Refrigeration and you hand into the brilliant, for a better future! You can also access (www.dx16888.com/supply_details_28557085.html), for more information about the company.