Professional supplier of tank car unloading hose

Antistatic plus kerosene fire-sale sale Hose | antistatic device with anti-static hose Hengshui Ward plus kerosene focus product development, our products have excellent oil resistance layer, the outer layer has excellent abrasion resistance, aging resistance, In addition to oil tankers can also be treated with static conductive rubber hose, making oil more secure process. Product Structure: fire-sale sale Antistatic plus kerosene hose | static device with a guide in the anti-static rubber hose plus kerosene (NBR) layer (built-static conductive copper), multi-layer cloth wrapped or cord winding layer, spiral steel skeleton enhancement layer, smooth chloroprene cover. Usage: When transporting flammable oil, due to the friction between the high-speed flow of oil is extremely prone to static electricity, if not rule out it will have a natural explosion, Rui Ming's anti-static oil hose in hose Built-static conductive copper layer can promptly eliminate static friction. Features: anti-static fire-sale sale plus kerosene hose | antistatic device with anti-static hose with a diameter tolerance of plus kerosene small, low temperature resistance, abrasion, ozone, erosion, oil and other stagnant performance, lightweight, durable soft tube durable advantages. In addition the tubular body built spiral steel skeleton, under negative pressure conditions can be used, but also resistance to the tubular body the tubular body due to excessive bending resulting in damage. Also, according to the customer's needs Rui Ming can also do oil tankers antistatic treatment within the rubber hose tube, usually copper or installation of conductive inner layer with a static conductive carbon black reinforced. Sometimes due to the presence of strong reducing materials, such as aluminum hydride four, two boron hydrogen and other substances. Encounter oxygen content increases, coupled with temperature control failures and other reasons, even if there is no fire, but also the risk of explosion. Therefore, there exists a strong reduction of the material, the use of oxidizer must be very careful. After first sample test to prove safety and reliability, and then set up a sound technical job security operation of law, strictly enforced. % 9HG / T3041 provides for two categories and three types other rubber hose fuel tankers row with body fluids. Application: Especially for tankers, tanker categories:? Foldable ?? Class B: not foldable: usually spiral wire reinforced. ? Type: Maximum working pressure: 0.3MPa Type 2:? The maximum working pressure of 0.7MPa 3 Type:? Maximum working pressure of 1.0MPa This standard applies to -40 ℃ ~ + row lose volume fraction of aromatic content in the temperature range of 55 ℃ accounting for 50% or less of the fuel hose. Does not apply to the fuel metering device, liquefied petroleum gas and aviation fuel system hoses. Tank truck unloading hose specific technical parameters: ID OD Working Pressure Burst Pressure Weight Maximum length bending radius Mm Inch Mm Inch Bar Bar Kg / mm mm 25 1 32 1-1 / 4 10-40 40-160 0.72 100 260 32 1 -1/4 431-11 / 1610-4040-160 0.92 100320381-1 / 2502-1 / 1610-4040-160 1.16 50380512652-17 / 3210- 4040-160 50510 2.21 63.5 2-1 / 2783-1 / 810-4040-160 2.63 20630763913-17 / 3210-4040-160 3.40 2076010241184- 23/32 10-4040-160 4.38 2010201084-1 / 41204-7 / 1010-4040-160 4.75 2011001154-1 / 21325-1 / 510-4040- 160 5.06 20 120012751455-7 / 1010-4040-160 5.60 20 150015061706-7 / 1010-4040-160 6.62 201 600 These are fire-sale sale Ward produced proof rubber Electrostatic plus kerosene hose | antistatic device with anti-static hose plus kerosene specific description, such as your product images, size, product performance have any questions please contact us. Whether it is pressurized discharge, vacuum or atmospheric discharge shoot material must control the speed of the material, not the high-speed jet, in order to avoid a lot of static electricity and cause scattered materials, increase the risk. Viscosity materials commonly used method of pressing the material discharge, pressure size should be adjusted at any time depending on material viscosity, prevent rapid discharge. Maximize the use of low viscosity material discharge pressure difference. As the material difficulties relative pressure, usually no larger than pressure 0.1MPa. The viscosity is too solid material available mechanical screw conveyor discharge method, the speed is not too fast, in order to prevent mechanical auger and intense friction materials, extrusion and dangerous. Explosive Substances Act should not be used mechanical screw conveyor discharge.