Ichiu PE jaw crusher

Technical Parameters Table 1 Model inlet size (mm × mm) maximum feed size (mm) Adjustment range of discharge opening (mm) processing capacity (t / h) the eccentric shaft speed (r / min) PE-150 × 250 150 × 250 125 10-40 1-5 300 5.5 0.65 PE-250 × 400 250 × 400 210 20-60 5-20 300 15 2.8 PE-400 × 600 400 × 600 340 40-100 16-60 275 30 6.5 PE- 500 × 750 500 × 750 425 50-100 45-80 275 55 10.1 PE-600 × 900 600 × 900 500 65-160 50-120 250 55-75 15.5 PE-750 × 1060 750 × 1060 630 80-140 52- 180 250 110 28 PE-800 × 1060 800 × 1060 640 100-200 136-230 250 110 29 PE-900 × 1200 900 × 1200 750 95-165 140-260 200 110 50 PE-1000 × 1200 1000 × 1200 850 195 -265 315-342 200 110 51 PE-1200 × 1500 1200 × 1500 1020 150-300 400-800 180 160 100 PEX-250 × 1000 250 × 1000 210 25-60 16-52 330 30-37 6.5 PEX-250 × 1200 250 × 1200 210 25-60 20-60 330 37 7.7 PEX-350 × 750 350 × 750 300 15-80 30-52 300 30 6.8 works The series crusher works for the song moving extrusion type, it works are: motor drive belt and pulley, through the eccentric shaft to move up and down movement of the jaw, when the movable jaw rises between the angle between toggle plate and moving jaw becomes large, thus promoting the moving jaw plate close to the fixed jaw plate, with the same time the material is crushed or split pieces to achieve the purpose of crushing; when moving jaw down, the angle between toggle plate and moving jaw smaller, movable jaw plate under the action of the rod, spring, leaving the fixed jaw plate, then the crushed material from the crushing chamber under discharge port. With the continuous rotation of the motor for the periodic motion of mobile jaw crusher crushing and waste material, to achieve mass production. The main features of a simple structure, easy maintenance; stable performance, low operating costs; crushing ratio. 2, the use of high-strength steel, forming a casting, with wear, compression, long life and other advantages. Mainly applied crushing large, medium and small stones and corresponding objects. Jaw crusher is one of the most commonly used in production mining crushing equipment, mainly used for no more than 320 MPa compressive strength of various materials in the debris, crushing operations, a crushing, high yield, uniform particle size ratio simple structure, reliable operation, easy maintenance, operating costs and economic characteristics. Jaw crusher purpose and scope 1, the series crusher is mainly used in metallurgy, mining, chemical, cement, construction, refractory and ceramic and other industrial sectors for the broken and crushing all kinds of hard ores and rocks with. 2, the series is best suited crusher crushing compression strength not higher than 320MPa (MPa) in a variety of soft and hard ore, the largest block of the material to be broken is not greater than the technical parameters specified in the table.