Screw locking agent, thread sealants, plastic screws, anaerobic

Osborne thread locking sealant products are widely used, with locking, sealing, corrosion and other effects, alternative spring pad, cotter pins and other mechanical locking mode. A242 medium strength thread locking agent ◆ General purpose, thixotropic viscosity. For M6-M20 thread locking and sealing. ◆ removable screw locking agent. Having certain lubricity, can accurately achieve locking strength. A262 thread locking agent thixotropic viscosity ◆ High strength, good chemical resistance. ◆ applicable to most metal surfaces. For the M20 following thread locking and sealing. ◆ permanent locking and chemical environment in poor conditions excellent rust and corrosion resistance. A272 thread locking agent high temperature, high strength ◆ high temperature of 230 ℃. ◆ can be used for locking cylinder head stud threads. ◆ most surfaces including uncleaned fastener fast curing. ◆ below for M36 bolts to be heated when removing tools apart. A290 thread locking agent infiltration ◆ Medium strength, low viscosity, fast curing. ◆ been assembled for the M2-M12 thread locking and sealing. Can also be used to seal porous welds and castings trachoma. ◆ prevent rust and corrosion thread, when removing the need to open the local heating tools. A220 small thread locking agent solvent-◆ green / red / transparent, solvent evaporation curing. ◆ pre-assembled or assembled for less M6 threaded fasteners locking seal. A222 thread locking agent low strength, thixotropic viscosity ◆ applicable to most metal surfaces, easy to disassemble. ◆ applied to the fastener thread M6 or less ideal, with some lubrication, and can accurately achieve locking strength. A243 thread locking agent resistance to oil, the strength ◆ fast curing, can be used for inert surface, good oil content, easy to disassemble. You can use the stick slightly greasy work surface. ◆ can be used for locking and sealing M20 thread below. A271 thread locking agent high strength, low viscosity ◆ M36 thread for permanent locking and sealing. ◆ Removal tools require local heating apart. A277 high strength thread locking agent ◆ High viscosity, excellent chemical resistance. ◆ M36 thread for permanent locking and sealing. ◆ to prevent rust and corrosion thread, when removing the need for heating tool apart.