Silicone mold and molding temperature silicone

 ● environmental temperature food mold and molding silicone us · This product is a two-component addition silicone material that can be cured at room temperature can also be heat cured. ● environmental temperature food mold and molding silicone Features · low shrinkage, the crosslinking process does not release low molecular weight, so the volume is constant, the shrinkage rate of less than 0.1% * without limitation product thickness, depth, curing can have excellent high temperature resistance, temperature can reach 300-500 degrees · food grade, non-toxic, odorless, FDA food grade certification by High tensile strength, tear strength, turn mode more often · mobility, easy perfusion; can also be cured at room temperature heat curing, easy operation ● environmental temperature food mold and molding silicone mold for use · casting epoxy resins, polyester resins, polystyrene, vinyl, wax, large concrete structures, culture stone, concrete etc., can also be used for metal crafts, automotive and other precision alloy mold manufacturing, food-grade mold manufacturing. ● environmental temperature food mold and molding silicone use and precautions · The A, B two components by weight of 1: 1 mix, after vacuum degassing can be watered. At room temperature (28 degrees) 30 minutes operating time, 2-3 hours to fully cure; heating 60-120 degrees, can be completely cured in a few very minute. · To use the operation and had condensation silicone separate container, use the unused room to operate this silicone silicone tool. · Before use, first made in the mold species skin test to see whether it will solidify, and then put to use high-temperature environment ● food mold and molding silicone Packing · Packing: A: 25kg / 200kg B: 25kg / 200kg, metal pail ● environmental temperature and molding silicone mold food storage and transportation · Storage period: 12 months (sealed, cool and dry place); ? These products are non-dangerous goods, according to general chemical transport.