Slider KWVE30-W with linear recirculating ball bearing

Slider KWVE30-W with a slider for linear recirculating ball bearing and guideway assemblies returned with linear recirculating ball bearing and guideway assemblies KUVE30-W slider slider KWVE30-W Compressive load Tensile load Moments about all axes Sealed on all greased Oil lubrication Carriages KWVE30-W with linear recirculating ball bearing and guideway assemblies slider slider KWVE30-W with linear recirculating ball bearing and guideway assemblies slider load direction H 42 mm B 142 mm L 97,6 mm 1) Positioning face 2) Marking 3) according to DIN 71 412-B M6 Lubrication nipple with tapered head is supplied loose A1 31 mm A2 9 mm A3 11,25 mm AL1 19 mm a5 15 mm aL max 71 mm a L and a R length l max aR depends on the length l max aL rail min 20 mm a L and a R are dependent on the guideway length l max aR max 71 mm a L and a R are dependent on rail min 20 mm a L and a R are dependent guideway length l max b 80 mm Tolerance: -0,005 / -0,03 G2 M10 screws according to DIN ISO 4762-12.9 maximum tightening torque (Nm): M5 = 5,8 M6 = 10 M8 = 24 M10 = 41 M12 = 83 M14 = 140 If possible, there should be secured against rotation. H1 6 mm H4 13,8 mm H5 6 mm h 23,5 mm h1 11,5 mm JB 124 mm JL 52 mm jB 50 mm jL 80 mm K1 M8 screws according to DIN ISO 4762-12.9 maximum tightening torque (Nm) : M3 = 2,5 M4 = 5 M5 = 10 M6 = 17 M8 = 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, there should be secured against rotation. K3 M8 screws according to DIN ISO 4762-12.9 maximum tightening torque (Nm): M3 = 2,5 M4 = 5 M5 = 10 M6 = 17 M8 = 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 if possible should be secured against rotation. K6 M8 screws according to DIN 7984-8.8 standard maximum tightening torque (Nm): M4 = 2 M5 = 4 M8 = 12 If possible, there should be secured against rotation. L1 72 mm lmax 2000 mm Maximum length of single-piece guideways; longer guideways are supplied in several sections and are marked accordingly. According to the contract, the maximum length of single track up to six meters. T5 12 mm T6 12 mm for installation from above: the quality of the thread depth largest middle threaded holes T6 + 2,5 mm mW 1,95 kg Mass of carriage mS 13,6 kg / m rails according to DIN 636, the basic load rating The calculation of the basic dynamic load rating based on practical experience. C 27500 N basic dynamic load rating C0 55000 N Basic static load rating about X axis M0x 2660 Nm Static moment rating about Y axis M0y 700 Nm Static moment rating about Z axis M0z 700 Nm Static moment rating