TD-type bucket elevator | Xinxiang Chen Sheng vibration | quality TD-type bucket elevator

 Bucket elevator traction components have chain, plate chain and tape several. Structure and manufacturing chain is relatively simple, and the hopper is also very strong, large transport abrasive materials, the chain wear small, but its larger self. Plate chain structure is strong, light weight, suitable for lifting capacity of the hoist, but hinged joints susceptible to wear, tape is relatively simple, but not suitable for transporting large abrasive materials, plastic materials, the temperature does not exceed 60 ℃ TD-type bucket elevator principle, steel belt clip allows the material temperature of 80 ℃, heat-resistant plastic material to allow the temperature reaches 120 ℃, chain, plate chain conveyor material temperature up to 250 ℃. Bucket elevator must be securely mounted on a solid concrete foundation. Surface concrete foundation should be flat and horizontal state TD type bucket elevator suppliers to ensure bucket elevator after installation to reach vertical requirements. Height higher bucket elevator in which the Ministry of housing and proper position of the upper casing shall be its adjacent buildings (such as silos, workshops, etc.) together in order to increase its stability. Bucket elevator installed when you install the lower part, the anchor bolt TD-type bucket elevator, and then install the middle of the case, after Ann upper housing. Bucket elevator enclosure installation is successful, the correction verticality. Bucket elevator up and down with the full-height vertical line measurement error should be less than 10mm. Bucket elevator and down the shaft should be parallel, its axis should be in the same plane. The height of the lower bucket elevator installation, you can put on, in all lower case is connected to the ground plane and the more precisely, and then hanging straight overall fixed concrete foundation. Bucket elevator machine cabinet installed after the installation of the chain and the hopper. Bucket elevator hopper connected by a U-shaped screws, both chain joints, but also a hopper fixture. U-type screw and tighten the nut must be reliable locking. TD-type bucket elevator | Xinxiang Chen Sheng vibration | quality TD-type bucket elevator is provided by Xinxiang Chen Sheng Machinery Co. vibration. "Vibration sieve, linear sieve, ultrasonic vibrating screen" preferred vibration Xinxiang Chen Sheng Machinery Co., Ltd. (www.xinhaojx.com), the company is located: Weibin District Xinxiang City Industries, over the years, Xinxiang Chen Sheng vibration to provide customers with the best quality service, Contact: Su Jingli. Welcome to the new and old customers call, letter, visit the guide, business negotiations. Xinxiang City, Chen Sheng vibration expect to be your long-term partner!