Wind chassis | Yi-air-conditioning (certified) | wind chassis

 When installed in the chassis wind wind chassis stability problems due to the carriage when the high temperature flue gas or air and the choice of boiler centrifugal fan, should be set up to start with the valve, causing the motor to prevent overload cold running. The connection between the fan wind chassis repairs and export and wind chassis air duct, flexible joints should be located. Inlet duct, the duct, and other devices should be supported independently by the foundation or support other components of the building firm, should not bear the weight of other chassis parts are. Must increase the damping rubber pad between the fan and its steel frame basis. All the fan and motor assembly is installed in one piece steel frame advantage chassis models, damping steel frame mounted to the top of the base pad, vibration pad is best to use porous rubber plate. Centrifugal wind chassis is mainly used in high-pressure, small air volume of air box use case, the request does not exist in the air transport small particles of solid because the curved front leaf will be set to keep the solids in the gas stream. Dust feeder centrifugal wind chassis in cement plant raw materials, cement grinding machine reciprocating coal dust removal system has to use two. Here to talk about the three small series site workings centrifugal wind chassis. Under normal circumstances, the centrifugal wind chassis according to its own purpose, structure, its transmission mode can be roughly divided into: coupling drive type, directly coupled to the motor and belt drive type in three ways. Coupling drive type is often said that the D-type transmission, which is characterized by motor and fan drive shaft coupling operation. Motor direct connection type is often said that the A-type transmission, its main feature is the fan impeller is mounted directly on the motor shaft, and what measures do not need to connect. Finally, a transfer method for belt drive type wind chassis, which is also divided into a common transmission mode B, C, E, F type. Type B is a pulley in the middle of the two bearings, impeller mounted cantilever fashion. Type C is mounted on one end of the pulley shaft of the cantilever, the cantilever mounting in the form of an impeller of the other end of the shaft. E-type for the pulley arm installation, impeller mounted on the bearing between the two forms. F-type impeller is mounted directly compared between the two bearings, no form of any other institution. This is a common way to wind belt drive transmission Chassis | Yi-air-conditioning (certified) | wind chassis provided by the Texas Air Conditioning Equipment Co., Ltd. Tong Yi. Yi Tong Air Conditioning Equipment Co., Texas (www.yitongkongtiao.com) is a leader in Dezhou, fans, ventilation equipment, over the years, the company implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Air conditioning in friendship through leadership with the staff warmly welcome all inquiries negotiations to create friendship through conditioning a better future.