Opportunities to undertake large plastic runway, Yunnan Yao sports, Fuyuan undertake large plastic runway

 Breathable plastic runway surface Product features: wear, pressure, waterproof, non-slip, shock, UV resistant, elastic medium, low maintenance, all-day use. Scope: all kinds of indoor and outdoor track and sports venues. Construction Technology: 1. base surface: asphalt concrete 50-100mm, the oil content of 5.8-6.4%, requiring smooth surface. 2. laying Plastics: Vinyl material polyurethane slurry plus uniform lay smooth (≥10mm), special machinery fully compacted. 3. Anti-slip layer: pure polyurethane surface paste was applied uniformly 1-2 Road, before the material evenly spilled red rubber curing. 4. draw dividing line: according to site requirements PU varnish or paint crossed. 5. Conservation: 48 hours before they can be officially used to walk 96 hours (24 ℃ ambient temperature to undertake large plastic runway prices prevail, in case of low temperature curing time should be extended). Laying Process Description: (1) First check the flatness of the base layer for leveling on uneven parts (such as cement concrete foundation needed pickling). (2) primer laying: Laying of foundation first cleaned up before the end of plastic, ready for construction tools. a) in accordance with the process required to measure the position of the construction line, put away the construction line. b) start laying side by site, according to the width of the one-time site scraping gum. c) When the squeegee speed even undertake large plastic track opportunities, timely show the bottom of the depression, were raised at the glue or gelling. d) After gelling of the audience checks to ensure that the thickness of the laying surface plastic. (3) surface rubber paving: try to shorten a) every barrel scraping gum glue interval undertake large plastic track program, so that a uniform speed glue. b) the thickness of the plastic surface observation time. c) shave gel, in front of uncured rubber, sprinkle with red particles, until completely cured undertake large plastic runway, the excess rubber surface cleaned. d) spray, make sure the particles do not fall off. (4) spray process line draw: athletics venues and facilities in accordance with the existing standard to accurately measure the position of the processing line, and then stencilled with polyurethane paint. Opportunities to undertake large plastic runway, Yunnan Yao sports, Fuyuan undertake large plastic runway provided by Kunming, Yunnan Yao Sports Facilities Engineering Limited. Kunming, Yunnan Yao Sports Facilities Engineering Co., Ltd. (www.kmdianyao.com) (http://www.kmdianyao.com) is Kunming, leader of construction over the years, the company is implementing the scientific management, innovation and development, honesty and trustworthiness policy, and satisfy customer needs. In Yunnan Yao sports leadership with the staff warmly welcome all inquiries negotiations to create the Yunnan Yao sports a better future. You can also access (http://www.kmdianyao.com/supply_details_41095031.html), for more information about the company.