EYE Japan Iwasaki metal halide tube M045-L31 UV ultraviolet lamp

Wholesale EYE UV lamp H075-L31 M045-L31 ,,,,,,,,,,,,,,,,,, EYE UV lamp models, imported, quality assurance. Welcome to contact us! 80W / cmM004-L21 M01-L212 M015-L212 M02-L21 M024-L21 M03-L21 M04-L21 M05-L21 M06-L21 M08-L21 M12-L21 120W / cmM006-L31 M015-L312 M02-L31 M03-L31 M036 -L31 M04-L31 M045-L31 M05-L31 M06-L31 M075-L31 M084-L31 M09-L31 M096-L31 M102-L31 M11-L31M12-L31 M13-L31 M13-L31X M17-L31 M15-L31 M15-L31X M08 -L31] 160W / cmM008-L41 M02-L41 M02-L41X L03-L41 M04-L41 M06-L41 M08-L41 M096-L41 M096-L41X M112-L41 M12-L41 M114-L41 M176-L41 M176-L41X M20-L41 240W / cmM03-L61 M06-L61 M12-L61 M144-L61 M018-L61 M264-L61 M30-L61 H12-L61 H18-L61 H264-L61 H30-L61 320W / cmM04-L81 M08-L81 M12-L81 M16-L81M05- L2514 M065-L2514 M085-L2514 M115-L2514 MA015-L312 MA02-L21 MA03-L31 MA04-L21 MA048-L213 MA06-L31 MA06-L21 MA08-L21 MA09-L21 MA11-L21 MA18-L31 MA04-L41 UV lamp use Note: 1, UV ultraviolet lamp must be matched with the same ballast, UV transformer and capacitor matching before using. 2. Install the lamp boxes shall be fitted with a good air cooling system to ensure that the heat lamp and substrate deformation from heat. 3, the lamp must stick with gauze and alcohol wipe before machine handprint wall lamps and oil and other dirt, which will cause the lamp after ignition devitrification, if UV-curable materials with high levels of volatile solvents or work environment dust contamination, every other week, wipe with alcohol lamp once, but to ensure that the lamp early devitrification. 4, throughout the process, should be maintained between the lamp and the lamp good contact with the contact point, otherwise it will cause severe oxidation lamp, causing the lamp sealing at the burst. 5, UV lamps need to start in the cold state. When started again, to wait UV lamp is completely cooled before start, after 5 minutes, more frequent switching times, shortened lamp life 6, the average life expectancy Sunbeam point light plant high pressure mercury lamp is 800-1000 hours, normal work lamp The surface temperature of the tube is 600 ~ 700 ℃. Mainly related to the number of starts its lamp. 7, is prohibited under the lamp and transformer overload state of work in order to avoid burning lamp transformer explosion or accident. Supply voltage fluctuations should not be too large, such as a sudden drop in more than 5%, may cause self-extinguish. Where the lamp burned out lamp burst caused by the intrinsic quality of the lamps do not belong purely used improperly, are not returnable. 8, the transformer must have good natural ventilation for cooling.