Baler accessories electric components _ e-commerce (certified) _ Tianjin baler parts

 Tianjin Chenyu recommend: pneumatic packer Technical parameters: Machine size 280 × 160 × 180mm Max tension 3000N strapping tape 13 \ 16 \ 19 \ 25mm wide and 0.5-1.5mm thick envelope with a form of friction heat welding applicable strap PP and PET with automatic balers with Universal Pressure 0.65-0.8MPa use and maintenance 1, must be checked before starting the baler parts are intact. Each part baler parts cam assembly screws and nuts is loose, there should be tightened. If you are missing a small nail caps phenomenon M1 motor baler parts, maintenance personnel must be notified in a timely manner for 2, check whether the debris inside the belt rail jam, if there must be cleared baler parts, conveyor belt in orbit within blowing with compressed air dust 3, check whether the knife set and skateboard accessories, electric component parts of starvation baler, if missing, you must use dipped drip method of refueling, usually with a stick dipped in oil, slowly drop the top, can not fall way flow conveyor belt rail, packing tape will slip. 4, the boot process if found to have abnormalities, such as loud, vibration, smell, etc., if they can not be found, should be shut down notify maintenance personnel to deal with, so as not to cause damage to internal parts baler parts electric components _ Chenyu Traders (certified) _ Tianjin baler parts supplied by Tianjin Chen Yu Trading Company. Tianjin Chen Yu Trading Company (www.chenyupack.com) is Tianjin, rope, tie a leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In the e-commerce leader with the staff warmly welcome all inquiries to discuss, e-commerce to create a better future.