Double suction pump maintenance | Xin-pump | Fujian double suction pump

 Pump main parts: pump, pump cover, impeller, shaft, double suction seal rings, bushings, etc; pump impeller and pump cover constitute the studio. In and out of the water on the flange, the system has to install a vacuum gauge and pressure gauge tube screw. The lower flange out of the water, there are drainage tube screw system; static balance check impeller, with both sides of the sleeve and the sleeve nut adjustment; shaft by two single row radial ball bearings. Bearings mounted in bearing the body, mounted on both ends of the double-pump suction pump with grease lubrication; double suction seal ring to reduce the water pump pressurized water chamber to drain back to the suction chamber; pump through flexible coupling direct drive from the motor, if necessary Can also be used when the internal combustion engine drive; soft seal packing (based on user needs can be mechanical seal structure). "Because of erosion double suction pump flow which uses the pump impeller flow channel wall and the water became too rough double suction pump suction, the friction coefficient of the pump flow channel increases, plus Sheung Shui in the pump great velocity, head loss increases. Hydraulic efficiency is reduced. "Volume loss and mechanical losses. Since the pump using a long time, mechanical wear and tear resulting leakage and resistance increases, the volumetric efficiency and mechanical efficiency. Double suction pump maintenance | Xin-pump | Fujian double suction pump provided by Hebei Xin-pump factory. Hebei Xin-pump factory (www.shuibeng999.com) quality services and products, and are subject to approval and confidence in the new and old customers and the industry. Our company is a certified member of the whole network Commercial Union, Commercial Union customer service icon on the page, you can talk directly with our customer service staff, to our future cooperation happy!