Supply of high quality imported 8910 3M reflective fabric reflective reflective tape 5C

Model: 3M8910 (Sinopec oil projects designated product) Product Specifications: Original size 2CM 3CM 5CM and 1.27 m Other sizes can be cut, 2CM 3CM 100 m / roll, 5CM 200 m / roll, cut dimensions are 50 m / roll. Material: 65% Polyester (Polyester) + 35% cotton Product performance: washing performance: 50 times, dry performance: 30 times, maximum washing temperature 40 ° C, low drum drying, ironing temperature 150 ° C, by the International Certification: A, by reflecting the performance GB 20653-2006 "occupation with high visibility warning clothing" in the three reflective material requirements. B, by MT113-1995 "coal mine fire retardant antistatic polymer products by test methods and requirements determination." Surface resistance in line MT113-1995 standard technical requirements. C, through the European EN471 certification and Oeko tex100 certification. Sewing Note: Use double chain stitched sewing method, per inch (2.5CM) does not exceed the 12-pin, sew to sew small 5/64 inch (2 mm) from the reflective fabric edges. Use of high-visibility warning clothing applications (uniforms, a variety of projects provides professional tooling, etc.) Outdoor (raincoat, consumer goods, clothing and shoes, etc.) Advantages compared with domestic reflective material, 3M reflective tape reflective intensity up 500RA above, washing performance is much higher than domestic reflective material, night visibility up to 200 meters. 3M Scotchlite reflective material contaminated with care instructions: Information Bulletin of the technology earlier due to heat and humidity cause pollution problems have been updated, it is in the form of technical bulletins notice worldwide use 3M Scotchlite reflective material for clothing and footwear manufacturers conduct. Please note that this notice is not included due to friction, joints, release stripped poor, pollution caused by dust and grease. Reflective surface contamination often carried garments assembled and stored in hot and humid environment. Any type of silver reflective material exposed surface contamination are likely to occur, 3M's test results show that the contamination was due to the aluminum layer between the glass beads caused by corrosion. However, these surfaces contaminated clothing fell just cause aesthetic level, because the back of the aluminum layer of glass beads did not receive corrosion, so the reflective properties are not affected. Such contamination often occurs in the following two situations: when in the process, contaminants and reflective material contact surfaces; clothing continued storage at high temperature and humidity conditions. Possible sources include: 1) the sweat, brine or other chlorine-containing compound 2) a strong acid or a strong caustic solution (acid or alkali solution easily) 3) sulfur-containing compounds Note: contamination does not means that the product is defective, but caused by subsequent processes. Care instructions: Use 3M Scotchlite reflective material care instructions in hot and humid environments. When you use the possibility of reflective material, if the reflective surface is affected, please follow these recommendations to reduce pollution: 1) the use of air conditioning cooling and lower humidity in the production and storage environments. 2) Avoid sweat, sewing machine oil or other contaminants in direct contact with the reflective surface of the material. In the processing of exposed glass beads reflective material, all operating workers should wear gloves. 3) For the thermal transfer film, and then remove the release liner until the final inspection. 4) when used to transport and store clothing bags, and add a desiccant. ■■■ Shipping Note: Prices quoted for the factory tax free shipping, Jiangsu, Zhejiang region's first heavy 8 yuan / KG, added weight of 2 yuan / KG, remote areas are way shipping logistics. ■■■ Reminder: All products before shipment we have dedicated staff to personally test the products are non-opening and cut the original packaging delivery, when the goods receipt must carefully check whether the items are intact appearance, packaging is damaged those who do not sign for the goods, received the goods the first time, please check the accessories are complete, if there is any questions, please do not sign and call us immediately, once the goods receipt, on behalf of both the appearance of the goods, quantity, accessories unanimously approved without controversy. Aftermarket products: goods for special issue, we will place the products in question 3M Company, 3M authority by the test results, true product quality problem itself, we offer a replacement. Ruoyin process manufacturers of chemical reactions and other quality problems occur due to the aluminum layer, I have the right to not be processed.