Lighting adhesive glue

I. Features: Lighting medium viscosity adhesive glue for alcohol type room temperature curing one-component silicone adhesive sealant, this product model for high-ZS-NJ-D939C strength, good adhesion to aluminum, copper, stainless steel and other metals have good adhesion; excellent electrical properties, heat resistance, the general temperature range -60 ℃ ~ 200 ℃. Is released during the curing alcohols, polycarbonate (PC), copper and other non-corrosive materials, in full compliance with the EU ROHS directive. Second, the typical use: Bulbs, optoelectronic industry guardrail adhesive and waterproof seal; plastic, metal, glass and ceramics and other objects adhesive seal; bonding locate electronic circuit boards and electronic components reinforcement, moisture seal. Third, the use of technology: a clean surface: will be sticky or coated surface is clean and remove rust, dust and oil and so on. 2, sizing: unscrew (or cut open) hose blocks, glue has been pushed to clean the surface, so that distribution can be. 3, the cure: to be glued or sealed parts in the air, let the natural cure. Curing process is a from the surface toward the interior of the curing process, within 24 hours (room temperature and 55% relative humidity) glue curing depth of 2 ~ 4mm, if sizing position is deep, especially not easily accessible to the site of the air, Full curing time will be extended, if the temperature is low, the curing time will be extended, 6mm thick sealant to fully cure time of 7 days or more required. Fourth, note: After lighting adhesive glue sizing is complete, unused plastic cap should be tightened immediately, kept under seal. When used again, if the seal a little crust, can be removed without affecting normal use. Gum during storage, pipe mouth may also appear small amounts of curing phenomenon, it will be cleared after normal use, does not affect product performance. V. Packing: 100ml / branch, 100 / box; 300ml / support, 25 / box. Six, storage and transportation: 1,25 ℃ cool and dry environment below six months, more than the shelf life of the product should be confirmed before use after no abnormalities. 2, these products are non-dangerous goods, according to general chemical transport. Caution leakage during transport! Seven, recommendations and declarations are recommended to use the lamps before the formal suitability test adhesive glue to do first. Because of the diversity of practical application, I do not guarantee specific conditions of use of our products emerging issues, is not liable for any direct, indirect, or incidental damages, the user in the course of any problems, you can contact our service department We will try to help you. Zhao Shun technology providers: Lighting adhesive glue Source: Dongguan Shun trillion Silicone New Material Technology Co., Ltd. Katherine sun Technology for 15 years specializing in silicone manufacturer, specializing in electronics, LED, household appliances, solar photovoltaic and other industries, with large customers provide experience in a variety of excellent applications, with a strong product development capabilities, was unanimously approved in the industry!