Small pharmaceutical tableting machine _ _ pharmaceutical tablet press rotary tablet machine

 Multifunction rotary tablet machine to install and use two adjustments, installation and adjustment of feeder: the feeder feeder mounted on a support frame, and then the knurled screws, and then adjust the adjusting screw so that the bottom surface of the feeder with turntable Countertops gap between 0.05 to 0.1 mm, tighten the knurled screws, and then adjust Spatulas board level, with the bottom flat working surface is flush with the turntable. Tighten the screws. Rotary tablet press is not a piece or a piece of ineffective causes and solutions: as raw material powder, slippery material, viscous materials like Western pharmaceutical formulation tablet press, the situation is made of particles (powder conditions, particles of elastic, the proportion of particles, moisture, etc.), have a direct impact on the quality of the tablets. Granulation and often can not be due to improper ingredients into pieces, or even damage to the machine. Therefore, the high-speed pharmaceutical tableting machine, this machine can not be used for fixed or semi-moist tablets. If it is found in the use of pressure modulated pressure is still quite large, although not a tablet or pressed into tablets but appeared too loose, start, chips, pits, out of powder phenomenon, it should be raw materials, ingredients direction to find out why and solve. Adjustment must not blindly increase the pressure, in order to avoid damage to the machine. Furthermore multifunction pharmaceutical tablet press, tablet press out some material hardness was not much, but there is a certain toughness pharmaceutical tablet press, its high throw high shock resistance is not bad (usually from 1 to 1.2 meters high off the ground is not broken to), it should meet the transport requirements of keeping the intensity, not just from the hardness of view, in order to avoid excessive pressure tableting, damage to the machine. Small pharmaceutical tableting machine _ _ pharmaceutical tablet press rotary tablet machine provided by Shenzhen Guangdong Machinery Co. mine. Shenzhen, Guangdong Machinery Co., Ltd. Ray (szleiyue.com) strong, credible, in Shenzhen, Guangdong chemical equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead mine Guangdong machinery and you work into the brilliant, for a better future!