Solar OEM processing

 Increasing penetration of solar energy, people's understanding and use of solar energy failed to catch up with its penetration, thus leading to the generation of a lot of problems. Today, solar OEM is for you to use the popularity of some solar and precautions. . a first vacuum tube Sheung Shui aftershave on the cold water temperature may drop; After the water is full, the overflow pipe will be out of the water, then turn off the switch, Sheung Shui, without overflow switch off and open the mouth water about half a minute, so that the tank Water released a little more, so as not to heat the water tank full of hot water overflow from the overflow pipe heat loss (except for the installation of intelligent control device); b in hot conditions with a collective cold areas, solar OEM recommends winter deactivated. when the water inside the tank vent to prevent frozen pipes;. c when adjusting the water temperature should be based on the season, light and water pressure, adjust the thermostat to a temperature suitable for bath faucets far, to prevent burns body;. d spent the day in summer After the hot water immediately Sheung Shui, Sheung Shui, or wait until the evening, or after a long interval of possible sunshine inside the vacuum evaporated moisture and high temperature (up to about 300 ℃), at this time there is the risk of rupture of the pipe Sheung Shui ; just pay attention to the above points, the use of solar energy is generally not a big problem, so the solar OEM recommended when using must pay attention to these points. Solar OEM OEM: http: //tyntiepai.com/