Features distribution cabinet frame

SYN2015.01 1, power distribution cabinet topcoat color should be in accordance with the requirements of Party awakened electrostatic spray coating attached to a solid, uniform color, no wrinkles, flaking, spots, and other undesirable phenomena leakage jet, at a distance of 1 m No significant difference was observed at and reflective, smooth surface, clean, no dents, scratches and other damage phenomenon. Additional plated parts bin to use, but also to ensure that no peeling, spots, leak-plated, rust and other undesirable phenomena, have reached the same surface quality requirements and on. 2, the power distribution cabinet mechanical briefly. Distribution box box <600mm optional plate thickness not less than 1.2mm, 2.0mm cold-rolled steel panel with power distribution cabinet cabinet <1000mm choice of not less than 1.5mm, panel thickness 2.0mm cold-rolled steel production, to ensure Distribution cabinet rugged structural integrity. Connection cabinet internal components and assembly layout is reasonable, the number of inlet and outlet holes reserved size, shape and cabinet installation specific parameters, such as compliance with the requirements of the design drawings. Distribution cabinet welding, bolting firm, uniform welds smooth, no welding leather; bolting a flat, spring washers, threaded 2-5 exposed buckle. Parts distribution within the cabinet, opening the edges smooth, no glitches and cracks and so on. Moving parts bin hoist flexible, open angle of not less than 90 degrees, the door locks using the built-in lock, door locks solid and reliable, there should be locked after shaking meditation, hinges have sufficient load-bearing capacity, while at four times the weight to ensure that no permanent deformation. Distribution cabinet doors and gates, the gap between the door and the casing uniform. 3, nameplates and schematic distribution bins: Each distribution cabinet made of metal nameplate nameplate nameplate in the product name, model number, manufacturer name, the main technical parameters, serial number, production date and other five. Nameplate attached to the front panel should be apparent at the beautiful location and reasonable, firm. Boxes, cabinets must be accompanied by the primary circuit, system diagrams, schematics, and other secondary control charts, matching supply with the power distribution cabinet. Source: http: //www.jldydq.cn/