CB-50TX ink viscosity meter, digital ink tack tester

Color ink viscosity Pradesh CB-50TX main technical parameters of intelligent use of modern industrial highest configuration: PLC + touch screen + servo motor, can be clearly and accurately display the instantaneous copper roller rpm, water temperature, automatic adjustment less than the required test conditions (servo motor rotation speed can be guaranteed not to exceed a turn), to ensure the stability of the test conditions under any circumstances, to ensure the accuracy and repeatability of the detection of the ink viscosity values. Instruments also equipped with user-friendly design, can be set to automatic measurement and manual measurement, the whole process without manual test roller inking roller clutch pressed, the instrument automatically. Instrument calibration sensor and load simple, tack values ??can be corrected with other brands worth an instrument to tack. Instruments expandable external PC to read the data (optional). The main technical parameters: copper roller spindle revolutions: I file --400 rev / min, II file --800 rev / min, III file --1200 rev / min IV file --1600 rev / min, V file --2000 rev / min plus custom speed (100-2000) r / min Power supply voltage: 220V 50HZ Electric Power: 1600 watts (including motor 800 watts, 800 watts tank) pump flow rate: 10 l / min (constant temperature water tank capacity: 6 liters ) spindle copper roller table after leveling horizontal error 0.03mm standard single hot water tank thermostat thermostat error soil 0.2 ℃ cold dual-± 0.1 ℃ (optional) display accuracy: 0.1 units in the same ink viscosity test Under the conditions of the complex viscosity measurement error ± 0.3 units of printing ink: test time, number, temperature, velocity, viscosity values ??of the standard easy to assemble, easy to clean refilling is an instrument Dimensions: 750x300x480mm instrument total weight: 130KG Noise: Less than 50 db inking speed can switch between automatic and manual, string action can be set to the middle position is not moving string soft-start mode, the standard general and UV dual roll for lithography, letterpress general or UV ink, UV flexo ink .