Corrosion glass flake clay flue gas desulfurization

[Introduction] vinyl ester glass flake coating consists of a modified epoxy resin, vinyl ester resin, glass flake, initiators, accelerators, pigments and additives and other components. [Details] glass flake corrosion glass flake clay clay using the steps, refers to a certain piece of a glass flake diameter and thickness were mixed with a variety of corrosion-resistant resin, and other accessories, the special mechanical preparation of clay. Temperature glass flake clay, is the use of special corrosion-resistant resin and special materials preparation, which has better thermal stability, corrosion resistance, fire power plant flue gas desulfurization equipment is antiseptic and chimneys, towers anticorrosive material of choice . Power plant flue gas discharge temperature can sometimes reach more than 160 ℃, and desulfurizer SO3-2 after formation, SO4-2 root has a strong chemical activity and penetration ability, therefore, anti-corrosion lining of the absorber must have a very good temperature resistance, chemical resistance and high resistance to medium permeability. Nature temperature glass flake clay, thanks to vinyl resin plus specific accessories, formulated with special mechanical appliances made in a particular environment (cream with TROWELING method of construction), which has better thermal stability , heat resistance up to 180 ℃, In addition, as a multi-layer glass flakes arranged in parallel, greatly extending the penetration path with excellent impermeability. Glass flake flake mortar liner in a non-continuous distribution of the resin, so that flake clay liner having a desired resistance to stress failure destruction capability, and thus more suitable for large temperature variations and has anti-corrosion lining equipment. Advantages of a glass flake resin corrosion by the medium, gas, water vapor penetration is much smaller than ordinary fiberglass. Not prone to diffusion medium, can be effectively prevented undercut, separation, bubbling, peeling and other physical damage. 2, shrinkage during curing. Since the glass flake dispersion of stress, the residual stress of each of the contact surface is small, the thermal expansion coefficient is small, so that the adhesive strength will not decay due to thermal expansion, good thermal stability. 3, strong wear resistance and abrasion resistance, mechanical damage is limited to the case of local proliferation of small trend. 4, good repair. After years of use, the destruction of the simple treatment can repair. 5, the protective surface adaptable, especially for complex surface corrosion. 6, good construction. Scales available antiseptic spray, roller, a variety of methods, such as construction scratch. Overall good, and on-site convenience ingredients, room temperature curable and thermally cured.