cnc saving fan, blower, breeze electromechanical

 Bearing Maintenance: Always check the bearing lubricant oil, if oil spills box appears, you can put a little cap bolts tightened, this is not enough, it may have to replace it with new packing up. When the bearing lubricant normal use, should be replaced at least once in six months, when for the first time, after about 200 hours of operation performed, the second oil change time in 1 to 2 months fans, after the lubricant should be checked once a week as there is no deterioration of lubricating oil, the oil-change work can be extended to two to four months time, provisions must be used when replacing oil grades (specified on the General Plan), Dongguan fans, old oil tank completely and put a clean Fill with fresh oil and to clean later. This is actually a way to increase the resistance by artificial computer gongs fan, and a waste of energy and money to meet the cost of the process and conditions for gas flow regulation requirements. This backward adjustment method, not only a waste of valuable energy saving fan cnc and regulation accuracy is poor, it is difficult to meet the modern industrial production and service requirements, the negative effects are very serious. Over the last few years, with the continuous improvement of inverter technology and development. Frequency increasingly perfect performance, has been widely used in different areas of AC variable speed. The enterprise has brought considerable economic benefits, and promote the automation of industrial production processes. cnc saving fan, fan, electromechanical breeze breeze provided by the Electrical and Mechanical. If you have any questions or consult this information, please contact us now! Our Company Name: Mechanical and Electrical Equipment Co., Ltd., Dongguan breeze (jingfengstore.1688.com) Contact: Mr Chan, or click on the "Business Alliance Customer Service" direct dialogue with us!