Supply ABS board Radio Telephone handle shell

Supply ABS board radio shell phone shell handle Supply ABS board radio telephone handle Supply ABS board radio shell phone shell handle Supply ABS board radio telephone handle Supply ABS board radio shell phone handle Supply ABS board radio telephone handle ABS shell plate is a new kind of material . Its full name is / butadiene / styrene copolymer board. English name Acrylonitrile-butdiene-styrene, is currently the largest output, the most widely used polymers. It PS, SAN, BS various properties of organic unity, both tough and hard, just with the excellent balance of mechanical properties. Working temperature: from -50 degrees to +120 degrees ABS board Main performance: excellent impact strength, good dimensional stability, dyeing, forming and machining, high mechanical strength, high stiffness, low water absorption, resistance to corrosion good connection is simple, non-toxic, odorless, has excellent chemical resistance and electrical insulation properties. Heat deformation at low temperatures also have high impact toughness. Or a hard, difficult to scratch, not easy deformation of the material. Low water absorption; high dimensional stability. Conventional ABS board is not very white, but the toughness is very good, you can use the shears cutting, but also open the mold punch. Use: Automotive Parts (dashboard, door tools, wheel covers, mirror boxes, etc.), radio shell, telephone handle, strength tools (vacuum cleaners, hair dryers, mixers, mowers, etc.), typewriter keyboard, recreational vehicles such as golf carts and jet sled vehicles. Specific gravity: 1.05 g / cc Burning Identification: continuous combustion, blue yellow flame, smoke and odor solvent shallow marigold experiment: cyclohexanone can be softened, aromatic solvents dry conditions had no effect: 80-90 ℃ 2 小时 molding shrinkage: 0.4-0.7% mold temperature: 25-70 ℃ (mold temperature will affect the finish of plastic parts, lower temperatures have resulted in a lower finish) melting temperature: 210-280 ℃ (Recommended temperature: 245 ℃) molding temperature: 200 -240 ℃ Injection speed: the speed of injection pressure: 500-1000bar ABS specifications sheet: thickness x width x length: 1-200mmx1000mmx2000mm, can also be customized according to size. ABS Bar Specifications: Diameter X Length: 5-200mmX1000mm